丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

丝印代码：OPA1679；Low-Distortion Audio Operational Amplifiers

文件：2.03954 Mbytes Page：48 Pages

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

丝印代码：OPA1679；Low-Distortion Audio Operational Amplifiers

文件：1.94702 Mbytes Page：46 Pages

丝印代码：OPA1679；Low-Distortion Audio Operational Amplifiers

文件：1.94702 Mbytes Page：46 Pages

丝印代码：OPA1679；Low-Distortion Audio Operational Amplifiers

文件：2.03954 Mbytes Page：48 Pages

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

丝印代码：OPA1679；OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

低失真 (-120dB)、低噪声 (4.5nV/rtHz)、四路音频运算放大器

OPA1678（双通道）和 OPA1679（四通道）运算放大器较音频电路中常用的传统运算放大器而言，可提供更高的系统级性能。OPA167x 放大器在 1kHz 时可实现 4.5nV/√Hz 的低噪声密度和 0.0001% 的低失真度，从而提高了音频信号保真度。它们在 2kΩ 负载下还提供 800mV 范围内的轨至轨输出摆幅，从而增加余量并实现动态范围最大化。\n\nOPA1678 和 OPA1679 可在 ±2.25V 至 ±18V（或 4.5V 至 36V）的极宽电源电压范围内工作，电源电流仅为 2mA，因此可适应许多类型的音频产品的电源限制。这些运算放大器是单位增益稳定型放大器，且 • 低噪声：1kHz 时为 4.5nV/√Hz \n• 高开环增益：114dB\n• 低静态电流： \n• 低输入偏置电流：10pA（典型值）\n• 宽增益带宽：16MHz (G = 1)\n• 轨至轨输出\n• ±2.25V 至 ±18V 或 4.5V 至 36V\n• 双通道和四通道版本\n• 双通道：SO-8、MSOP-8、SON-8\n• 四通道：SO-14、TSSOP-14、QFN-16;

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

Low-Distortion Audio Operational Amplifiers

文件：2.03954 Mbytes Page：48 Pages

OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

Low-Distortion Audio Operational Amplifiers

文件：1.94702 Mbytes Page：46 Pages

Low-Distortion Audio Operational Amplifiers

文件：1.21456 Mbytes Page：41 Pages

OPA167x-Q1 Automotive, Low-Distortion Audio Operational Amplifiers

文件：1.00699 Mbytes Page：28 Pages

丝印代码：OPA1679Q；OPA167x-Q1 Automotive, Low-Distortion Audio Operational Amplifiers

文件：1.00699 Mbytes Page：28 Pages

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

符合汽车标准的四通道、低噪声 (4.5nV/rtHz)、低失真 (120dB) 放大器

The dual-channel OPA1678-Q1 and quad-channel OPA1679-Q1 (OPA167x-Q1) operational amplifiers offer higher system-level performance over legacy op amps commonly used in audio circuitry. The OPA167x-Q1 amplifiers achieve a low 4.5-nV/√Hz noise density and low distortion of 0.0001% at 1 kHz, which i • AEC-Q100 qualified for automotive applications: \n• Low noise: 4.5 nV/√Hz at 1 kHz \n• High open-loop gain: 114 dB\n• 2 mA per channel\n• Low input bias current: 10 pA (typical)\n• Wide gain bandwidth: 16 MHz (G = 1)\n• Wide supply range: \n• Available packages: \n• Quad: Small QFN-16;

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001% at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G

OPA167x Low-Distortion Audio Operational Amplifiers

1 Features • Low noise: 4.5 nV/√Hz at 1 kHz • Low distortion: 0.0001 at 1 kHz • High open-loop gain: 114 dB • High common-mode rejection: 110 dB • Low quiescent current: – 2 mA per channel • Low input bias current: 10 pA (typical) • Slew rate: 9 V/μs • Wide gain bandwidth: 16 MHz (G = 1)

Low-Distortion Audio Operational Amplifiers

文件：1.21456 Mbytes Page：41 Pages

Low-Distortion Audio Operational Amplifiers

文件：1.21456 Mbytes Page：41 Pages

Low-Distortion Audio Operational Amplifiers

文件：2.03954 Mbytes Page：48 Pages

Low-Distortion Audio Operational Amplifiers

文件：2.03954 Mbytes Page：48 Pages

OPA167x Low-Distortion Audio Operational Amplifiers

文件：3.67513 Mbytes Page：52 Pages

OPA167x-Q1 Automotive, Low-Distortion Audio Operational Amplifiers

文件：1.00699 Mbytes Page：28 Pages

Single-Cell Li Battery Charger for Current-Limited Supply

General Description The MAX1679 battery charger for a single lithium-ion (Li+) cell comes in a space-saving 8-pin µMAX package. This simple device, in conjunction with a current-limited wall cube and a PMOS transistor, allows safe and fast charging of a single Li+ cell. Features ♦ Simple Stand-

Single-Cell Li Battery Charger for Current-Limited Supply

General Description The MAX1679 battery charger for a single lithium-ion (Li+) cell comes in a space-saving 8-pin µMAX package. This simple device, in conjunction with a current-limited wall cube and a PMOS transistor, allows safe and fast charging of a single Li+ cell. Features ♦ Simple Stand-

5 V-BIAS, 5.5 dBm OUTPUT, 1.8 GHz WIDEBAND Si MMIC AMPLIFIER

DESCRIPTION The µPC1679G is a silicon monolithic integrated circuit designed as medium output power amplifier for high frequency system applications. Due to +13 dBm TYP. output at 1 GHz, this IC is recommendable for transmitter stage amplifier of L Band wireless communication systems. This IC i

5 V-BIAS, 5.5 dBm OUTPUT, 1.8 GHz WIDEBAND Si MMIC AMPLIFIER

DESCRIPTION The µPC1679G is a silicon monolithic integrated circuit designed as medium output power amplifier for high frequency system applications. Due to +13 dBm TYP. output at 1 GHz, this IC is recommendable for transmitter stage amplifier of L Band wireless communication systems. This IC i

Hex TRI-STATEE TTL to MOS Drivers

文件：140.37 Kbytes Page：6 Pages