15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

15 MHz轨到轨运算放大器（单通道）

OP162（单通道）、OP262（双通道）、OP462（四通道）轨到轨15 MHz放大器具有新设计所需的超快速特性，以及精度和低功耗优势。这些器件具有极低的失调电压（典型值为45 µV）和低噪声，非常适合精密滤波器和仪器仪表应用。同时电源电流较低，典型值仅500 µA，对于便携式或高密度集成设计都至关重要。此外，与标准视频放大器相比，轨到轨输出摆幅能够提供更大的动态范围和控制能力。这些器件采用低至+2.7 V的单电源或最高±6 V的双电源供电，具有快速建立时间和宽输出摆幅，适合用作采样模数转换器的缓冲器。输出驱动电流为30 mA（吸电流和源电流），适合许多音频和显示应用的需要；在有限的时间内可 • 宽带宽：15 MHz\n\n• 低失调电压：325 µV（最大值）\n\n• 低噪声：9.5 nV/√Hz (1 kHz)\n\n• 单电源供电：+2.7 V至+12 V\n\n• 轨到轨输出摆幅\n\n• 低TCVOS: 1 µV/°C（典型值）\n\n• 高压摆率：13 V/μs\n\n• 无相位翻转\n\n• 单位增益稳定;

TORQUE PRODUCTS

文件：3.50277 Mbytes Page：32 Pages

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes Page：24 Pages

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes Page：88 Pages

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

FEATURES Wide bandwidth: 15 MHz Low offset voltage: 325 μV max Low noise: 9.5 nV/√Hz @ 1 kHz Single-supply operation: 2.7 V to 12 V Rail-to-rail output swing Low TCVOS: 1 μV/°C typ High slew rate: 13 V/μs No phase inversion Unity-gain stable APPLICATIONS Portable instrumentation Sampli

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

GENERAL DESCRIPTION The OP162 (single), OP262 (dual), and OP462 (quad) rail-to-rail 15 MHz amplifiers feature the extra speed new designs require, with the benefits of precision and low power operation. With their incredibly low offset voltage of 45 µV (typical) and low noise, they are perfectly

15 MHz Rail-to-Rail Operational Amplifiers

文件：471.55 Kbytes Page：20 Pages

包装：散装 描述：TERM BLOCK HDR 连接器，互连器件 针座、插头和插座

包装：散装 描述：TERM BLOCK HDR 16POS VERT 3.5MM 连接器，互连器件 针座、插头和插座

GaAs Infrared Light Emitting Diode

GaAs Infrared Light Emitting Diode For optical control systems Features ● High-power output, high-efficiency : PO = 3.5 mW (typ.) ● Infrared light emission close to monochromatic light : λP = 950 nm (typ.) ● Small ceramic package

Silicon epitaxial planar type

Silicon epitaxial planar type For switching circuits ■ Features • Short reverse recovery time trr • Small terminal capacitance, Ct

Silicon MOS IC

Silicon NPN Transistor TV Vertical Deflection

Description: The NTE162 is an NPN transistor in a TO3 type case designed for medium–to–high voltage inverters, converters, regulators, and switching circuits. Features: • High Voltage: VCEX = 400V • Gain Specified to 3.5A • High Frequency Response to 2.5MHz

POWER TRANSISTORS(10A,320-380V,125W)