供应NIPPON日本化工品牌 APXF6R3ARA331MF65G 原装现货联系QQ1640951075

Super low ESR， impedance and_high heat resistance have been obtained by usingconductive polymer as electrolyte.?Rated voltage range : 2 to 10Vdc， Capacitance range : 120 to 1，000μF?Case size range :φ5×3.9L toφ8×7.7L?Suitable for DC-DC converters， voltage regulators and_decoupling applications used oncomputer motherboards etc.?Solvent resistant type (see PRECAUTIONS AND GUIDELINES)?RoHS Compliant?Halogen Free◆SPECIFICATIONSItemsCharacteristicsCategoryTemperature Range-55 to +105℃Rated Voltage Range2 to 10VdcCapacitance Tolerance±20%_(M)(at 20℃， 120Hz)Surge VoltageRated voltage×1.15(at 105℃)Leakage CurrentShall not exceed values shown in STANDARD RATINGS.(at 20℃ after 2 minutes)Dissipation Factor(tanδ)0.12 max.(at 20℃， 120Hz)Low TemperatureCharacteristics(Max. Impedance Ratio)Z(-25℃)/Z(+20℃)≦1.15Z(-55℃)/Z(+20℃)≦1.25(at 100kHz)EnduranceThe following speci?cations shall be satis?ed when the capacitors are restored to 20℃ after the rated voltage is applied for 15，000 hours(E40， E46， F45 : 3，000 hours ) at 105℃.AppearanceNo signi?cant damageCapacitance change≦±20%_of the initial valueD.F. (tanδ)≦150%_of the initial speci?ed valueESR≦150%_of the initial speci?ed valueLeakage current≦The initial speci?ed valueBias HumidityThe following speci?cations shall be satis?ed when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at60℃， 90 to 95%_RH for 1，000 hours (E40， E46， F45 : 500 hours ) .AppearanceNo signi?cant damageCapacitance change≦±20%_of the initial valueD.F. (tanδ)≦150%_of the initial speci?ed valueESR≦150%_of the initial speci?ed valueLeakage current≦The initial speci?ed valueSurge VoltageThe capacitors shall be subjected to 1，000 cycles each consisting of charge with the surge voltage speci?ed at 105℃ for 30 secondsthrough a protective resistor(R=1kΩ) and_discharge for 5 minutes 30 seconds.AppearanceNo signi?cant damageCapacitance change≦±20%_of the initial valueD.F. (tanδ)≦150%_of the initial speci?ed valueESR≦150%_of the initial speci?ed valueLeakage current≦The initial speci?ed valueFailure Rate0.5%_per 1，000 hours maximum (Con?dence level 60%_at 10