2.4W Mono Class AB Audio Power Amplifier

1 Features Output power: 2. 4W (RL=4Ω, THD=10%) Small leakage current in power-down mode: 1uA (typical) High level Shut-down Adopt SOP8 package External gain adjustable Voltage range 3.0V—5.25V No need to drive output coupling capacitor, bootstrap capacitor and buffer network U

2.4W 单声道 AB 类音频功率放大器

音频功放芯片

Power Output at 5.0V, 10% THDN, 3Ω 3W (typ)

General Description The 8002 is an audio power amplifier primarily designed for demanding applications in low-power portable systems. It is capable of delivering 3 watts of continuous average power to an 3Ω BTL load with less than 10% distortion (THD) from a 5VDC power supply. the 8002 doe

2.0 Watt Audio Power Amplifier

Features
Improved PSRR at 217 Hz & 1 KHz 60 dB
Power output at 5.0V, 10% THD+N, 4Ω 2.0 W (typ.)
Power output at 5.0V, 1% THD+N, 8Ω 1.5 W (typ.)
2.2V – 5.5V operation
Improved circuitry eliminates pop-click noise during turn-on and turn-off transitions
No output coupling c

T1/CEPT Extended Temperature Range SMD Dual Line Interface Module

Units matched to leading transceiver ICs. Meet requirements for T1, E1, CEPT and PRI ISDN over extended temperature range –40 to +85˚C.

DIP Reed Relays

DIP REED RELAYS The 8000 Series is ideally suited to the needs of Automated Test Equipment, Instrumentation, Data Acquisition, and Process Control requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ from the

Portable computers

文件：629.51 Kbytes Page：17 Pages