High-Speed Isochronous Multiplexer

Description The High-Speed Isochronous Multiplexer integrated circuit multiplexes up to eight Serial Telecom (ST-BUS) links onto a single 20 MHz loop to facilitate point-to-point data transport requirements. The MT90710 connects easily with standard Fiber Optic interfaces to form a complete elect

High-Speed Isochronous Multiplexer

Description The High-Speed Isochronous Multiplexer integrated circuit multiplexes up to eight Serial Telecom (ST-BUS) links onto a single 20 MHz loop to facilitate point-to-point data transport requirements. The MT90710 connects easily with standard Fiber Optic interfaces to form a complete elect

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

Octal T1/E1/J1 Framer

Description The MT9072 is a multi-port T1/E1/J1 framing device that integrates eight fully independent, feature rich framers. The device is software selectable between T1, E1 or J1 modes and meets the latest relevant recommendations and standards from Telcordia, ANSI, ETSI and ITU-T. An extensive

CMOS E2/E3 Framer (E2/E3F)

Description The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations. G.742, G.745, G.751, or G.753. The E2/E3 Framer interfaces to line circuitry with either dual rail or NRZ signals. On the termin

CMOS E2/E3 Framer (E2/E3F)

Description The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations. G.742, G.745, G.751, or G.753. The E2/E3 Framer interfaces to line circuitry with either dual rail or NRZ signals. On the termin

CMOS DS3 Framer (DS3F)

Description The MT90733 DS3 Framer (DS3F) is designed for mapping broadband payloads into the DS3 frame format, which meets ANSI’s T1.107-1988 and supplement T1.107a-1990. Features • DS3 payload access in either bit-serial or nibble-parallel mode • C-bit parity or M13 operating mode • Separat

CMOS DS3 Framer (DS3F)

Description The MT90733 DS3 Framer (DS3F) is designed for mapping broadband payloads into the DS3 frame format, which meets ANSI’s T1.107-1988 and supplement T1.107a-1990. Features • DS3 payload access in either bit-serial or nibble-parallel mode • C-bit parity or M13 operating mode • Separat

T1/E1/J1 Single Chip Transceiver

Description The MT9074 is a single chip device, operable in either T1 or E1 mode, integrating either an advanced T1 (T1 mode) or PCM 30 (E1 mode) framer with a Line Interface Unit (LIU). Features • Combined E1 (PCM 30) and T1 (D4/ESF) framer, Line Interface Unit (LIU) and link controller with o

T1/E1/J1 Single Chip Transceiver

Description The MT9074 is a single chip device, operable in either T1 or E1 mode, integrating either an advanced T1 (T1 mode) or PCM 30 (E1 mode) framer with a Line Interface Unit (LIU). Features • Combined E1 (PCM 30) and T1 (D4/ESF) framer, Line Interface Unit (LIU) and link controller with o

T1/E1/J1 Single Chip Transceiver

Description The MT9074 is a single chip device, operable in either T1 or E1 mode, integrating either an advanced T1 (T1 mode) or PCM 30 (E1 mode) framer with a Line Interface Unit (LIU). Features • Combined E1 (PCM 30) and T1 (D4/ESF) framer, Line Interface Unit (LIU) and link controller with o

E1 Single Chip Transceiver

Description The MT9075A is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075A is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075A is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075A is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for Sa bits and channel 16. The LIU inte

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

E1 Single Chip Transceiver

Description The MT9075B is a single chip device which integrates an advanced PCM 30 framer with a Line Interface Unit (LIU). The framer interfaces to a 2.048 Mbit/s backplane and provides selectable rate data link access with optional HDLC controllers for S a bits and channel 16. The LIU interf

T1/E1/J1 3.3V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long haul LIU, an advanced framer, a high performance PLL, and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest ecommendations including AT&a

T1/E1/J1 3.3V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long haul LIU, an advanced framer, a high performance PLL, and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest ecommendations including AT&a

T1/E1/J1 3.3V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long haul LIU, an advanced framer, a high performance PLL, and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest ecommendations including AT&a

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

T1/E1/J1 3.3 V Single Chip Transceiver

Description The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs. In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&am

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

Visible Light Emitting Diode

FEATURES ◾ High Power Output ◾ Narrow Beam Angle ◾ High Reliability ◾ Stand-off Type APPLICATIONS ◾ Optical Sensor ◾ Indicators

High-Speed Isochronous Multiplexer

封装/外壳：220-LBGA 功能：- 包装：托盘 描述：IC TELECOM INTERFACE 220LBGA 集成电路（IC） 电信

CMOS E2/E3 Framer (E2/E3F)

CMOS DS3 Framer (DS3F)

T1/E1/CEPT/ISDN-PRI TRANSFORMERS

文件：1.41936 Mbytes Page：5 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

封装/外壳：100-BQFP 功能：收发器 包装：托盘 描述：IC TELECOM INTERFACE 100MQFP 集成电路（IC） 电信

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

T1/E1/J1 Single Chip Transceiver

文件：1.13822 Mbytes Page：151 Pages

E1 Single Chip Transceiver

文件：275.04 Kbytes Page：82 Pages

E1 Single Chip Transceiver

文件：275.04 Kbytes Page：82 Pages

E1 Single Chip Transceiver

文件：275.04 Kbytes Page：82 Pages

T1/E1/CEPT/ISDN-PRI TRANSFORMERS

文件：1.41936 Mbytes Page：5 Pages

SB® 350 Connectors Up to 500 Amps

The SB® 350 is the largest connector in the series with power capabilities up to 500 amps with a 350 mcm wire. Wires ranging from 1/0 to 350 mcm (53.5 to 185 mm²) fit into the one piece housing available in standard PC or a chemical resistant PBT/PC blend. Silver plated wire or busbar contact