低压 5V DC 电机驱动

MS3111S 是一款低压 5V 直流电机驱动芯片，为摄像机、消费类产品、玩具和其他低压或者电池供电的运动控制类应用提供了集成的电机驱动解决方案。\nMS3111S 能提供高达 0.8A 的输出电流。可以工作在1.86V 的电源电压上。\nMS3111S 具有 PWM(IN/IN)输入接口，与行业标准器件兼容，并具有过温保护功能。 • H 桥电机驱动器\n-- 驱动直流电机或其他负载\n-- 低导通阻抗(HS+LS)850mΩ\n• 0.8A 驱动电流\n• 电源电压 1.86V\n• 接口类型： PWM(IN1/IN2)输入模式\n• 过温保护\n• 低电流睡眠模式（当 IN1=IN2=0 时进入）;

MicroPower??Regulated Charge Pump

General Description The AAT3111 ChargePump™ is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, the AAT3111 can deliver up to 150mA to the voltage regulated output. The AAT3111 feature

NPN Epitaxial Silicon Transistor

Switching Application (Bias Resistor Built In) • Switching circuit, Inverter, Interface circuit, Driver Circuit • Built in bias Resistor (R=22KΩ) • Complement to FJV4111R

Vertical Driver LSI for Video Camera CCD Area Image Sensor

Overview The MN3111H is a vertical driver LSI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction with such external components as four booster capacitors, six voltage stabilization capacitors, eight Schottky barrier diodes, and two Z

Vertical Driver LSI for Video Camera CCD Area Image Sensor

Overview The MN3111H is a vertical driver LSI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction with such external components as four booster capacitors, six voltage stabilization capacitors, eight Schottky barrier diodes, and two Z

FET BIAS CONTROLLER WITH POLARISATION SWITCH AND TONE DETECTION

DEVICE DESCRIPTION The ZNBG series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR cellular telephones etc. with a minimum of external components. FEATURES • Provides bias for GaAs and HEMT FETs • Drives up to three