50 kPa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors

0 to 50 kPa (0 to 7.25 psi) 40 mV FULL SCALE SPAN (TYPICAL) The MPX2050 series device is a silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output — directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with t

Sensor

Quality and Reliability—Overview A Major Objective of the Production Cycle From rigid incoming inspection of piece parts and materials, to stringent outgoing quality verification, the Motorola assembly and process flow is encompassed by an elaborate system of test and inspection stations; station

50kPa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors

The MPX2050 series devices are silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output, directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chi

50 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors

文件：127.86 Kbytes Page：9 Pages

50 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors

封装/外壳：4-SIP 模块 包装：卷带（TR） 描述：IC PRESSURE SENSOR 4-PIN 传感器，变送器 压力传感器、变送器

Pressure Sensor, 10V, 0/50kPa

CCD Monochrome Video Camera Signal Processor IC

■ Features • Frequency characteristics:10MHz (icompatible with the CCD image element of 330,000 pixels) • AGC range:18dB (improved SN ratio) • Operating supply voltage range:4.5V to 5.3V (typ. 5V) • Power consumption:typ. 225mW

Integrated Circuit 31/2-Digit Single Chip A/D Converter

Description: The NTE2050 and NTE2051 are high performance, low power 3–1/2 digit A/D converters containing all the necessary active devices on a single CMOS IC. Included are seven segment decoders, display drivers, reference and a clock. The NTE2051 is designed to interface with a liquid crystal

SCRs 1-70 AMPS NON-SENSITIVE GATE

Features ● Electrically Isolated Packages ● High Voltage Capability - 30 - 600 Volts ● High Surge Capability - up to 950 Amps ● Glass Passivated Chip

SCHOTTKY BARRIER RECTIFIERS(VOLTAGE- 20 to 100 Volts CURRENT - 20.0 Ampere)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, high current capability • High surge capacity. • For

32W Hi-Fi AUDIO POWER AMPLIFIER

DESCRIPTION The TDA 2050 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB audio amplifier. Thanks to its high power capability the TDA2050 is able to provide up to 35W true rms power into 4 ohm load @ THD = 10, VS = ±18V, f = 1KHz and up to 32W into 8