3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62130/MP62131 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62130/MP62131 Analog switch features 90mΩ on-resistance and operates from 2.7V to 5.5V input. It is available with a guaranteed curre

3.3V / 5V，单通道500mA限流配电开关，带输出放电功能

MP62130/MP62131配电开关具有内部电流限制功能，可以防止由于错误的负载条件而损坏主机设备。该模拟开关具有90mΩ导通电阻，可在2.7V至5.5V输入电压范围内工作。它提供有保障的电流限制功能，非常适合负载开关应用。MP62130/MP62131还具有内置保护功能，可防止过流和增加的热应力。它通过进入恒流模式来限制电流，从而提供过流保护。当器件由于短路而温度升高时，器件将关闭。一旦温度降至约120°C，便恢复工作。MP62130/MP62131采用 MSOP8 和SOIC8封装。 • 500mA 连续输出电流\n• 精确的限流值\n• 输出放电功能\n• 2.7V 至 5.5V 输入电压范围\n• 90uA 静态电流\n• 90mΩ MOSFET\n• 过温关断保护\n• 欠压锁定（UVLO）保护\n• 8ms FLAG抗尖峰脉冲时间\n• 上电期间无FLAG故障\n• 反向电流阻断\n• MSOP8 和SOIC8封装;

3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62130/MP62131 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62130/MP62131 Analog switch features 90mΩ on-resistance and operates from 2.7V to 5.5V input. It is available with a guaranteed curre

3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62130/MP62131 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62130/MP62131 Analog switch features 90mΩ on-resistance and operates from 2.7V to 5.5V input. It is available with a guaranteed curre

3.3V / 5V，单通道500mA限流配电开关，带输出放电功能

MP62130/MP62131配电开关具有内部电流限制功能，可以防止由于错误的负载条件而损坏主机设备。该模拟开关具有90mΩ导通电阻，可在2.7V至5.5V输入电压范围内工作。它提供有保障的电流限制功能，非常适合负载开关应用。MP62130/MP62131还具有内置保护功能，可防止过流和增加的热应力。它通过进入恒流模式来限制电流，从而提供过流保护。当器件由于短路而温度升高时，器件将关闭。一旦温度降至约120°C，器件便恢复工作。MP62130/MP62131采用 MSOP8 和SOIC8封装。 • 500mA 连续输出电流\n• 精确的限流值\n• 输出放电功能\n• 2.7V 至 5.5V 输入电压范围\n• 95uA 静态电流\n• 90mΩ MOSFET\n• 过温关断保护\n• 欠压锁定（UVLO）保护\n• 8ms FLAG抗尖峰脉冲时间\n• 上电期间无FLAG故障\n• 反向电流阻断\n• MSOP8 和SOIC8封装;

3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62130/MP62131 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62130/MP62131 Analog switch features 90mΩ on-resistance and operates from 2.7V to 5.5V input. It is available with a guaranteed curre

3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62130/MP62131 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62130/MP62131 Analog switch features 90mΩ on-resistance and operates from 2.7V to 5.5V input. It is available with a guaranteed curre

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC PWR SWITCH 1:1 8MSOP 集成电路（IC） 配电开关，负载驱动器

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC PWR SWITCH 1:1 8MSOP 集成电路（IC） 配电开关，负载驱动器

BIPOLAR LINEAR INTEGRATED CIRCUIT (AUDIO POWER AMPLIFIER)

AUDIO POWER AMPLIFIER

SOLENOID DRIVER SWITCH MODE POWER SUPPLY

DESCRIPTION The L6213 is an IC containing a S.M.P.S. delivering 1A at a voltage of 5V and a section designed to drive a solenoid with a current up to 5A. The device is realized in BCD mixed technology, which combines isolated DMOS power transistor with CMOS and Bipolar circuits on the same chip.

Micropower, SC-70, 100mA CMOS LDO Regulator

DESCRIPTION The SP6213/4 is a 100mA CMOS linear voltage regulator offered in an SC-70 package that reduces board space requirements by 50 over a SOT-23 package. The SP6213/4 features low dropout voltage (250mV at 100mA ), low ground current (135µA at full load) and low, 65µA quiescent current. De

Silicon NPN epitaxial planer transistor

Silicon NPN epitaxial planer transistor For digital circuits ■ Features ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. ● MT-1 type package, allowing supply with the radial taping.

Silicon NPN epitaxial planer transistor

Silicon NPN epitaxial planer transistor For switching/digital circuits ■ Features ● Two elements incorporated into one package. (Transistors with built-in resistor) ● Reduction of the mounting area and assembly cost by one half. ■ Basic Part Number of Element ● UN1213 × 2 elements