SOLENOID DRIVER SWITCH MODE POWER SUPPLY

DESCRIPTION The L6213 is an IC containing a S.M.P.S. delivering 1A at a voltage of 5V and a section designed to drive a solenoid with a current up to 5A. The device is realized in BCD mixed technology, which combines isolated DMOS power transistor with CMOS and Bipolar circuits on the same chip.

SOLENOID DRIVER SWITCH MODE POWER SUPPLY

Solenoids with Kick and Drop

The Kick and Drop variants of the AC10 and AC19 coil types use two windings in one solenoid. Thanks to an increased inrush power for the first winding, the switchable pressure range is increased as installation volumes stay the same. The second winding is switched in series after 500 ms. Thanks

Pressure measuring device / Switch

This intelligent mini transmitter/switch with an extra-large display is specially designed to switch alarms and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the three-key keypad under the display. In addition, the process value can be

Screw-in temperature threshold detector/ transmitter with display

This intelligent threshold detector/transmitter with an extra large display is specifically designed to monitor limit values or an ON/OFF or continuous control loop. Two versions are available: the 8400 Compact and 8400 for wall mounting. The wall-mounted version must be inserted into a holder

3.3V LVCMOS Surface Mount Crystal Clock Oscillator

文件：84.6 Kbytes Page：2 Pages

Component 1 3 X 1 PAIR

文件：75.6 Kbytes Page：2 Pages