2A, 28V, E-Fuse with Adjustable Current Limit

The MP5042 is a protection device designed to protect circuitry on the output from transients on the input. The MP5042 also protects the input from shorts and transients coming from the output. During start-up, the inrush current is limited by the slew rate at the output. The slew rate is controlled • Wide 4.2V to 28V Operating Input Voltage (VIN) Range\n• 115mΩ Integrated MOSFET\n• Configurable Soft-Start Time (tSS) via the DV/DT Pin\n• ±7% ILIMIT Accuracy at 800mA\n• Over-Current Protection (OCP) with Hiccup Mode and Latch-Off Protection\n• Available in a TSOT23-6 Package\n;

13-16GHz High Power Amplifier

GaAs Monolithic Microwave IC Description The CHA5042 is a three-stage pHEMT HPA MMIC designed for VSAT ground terminals and other radio applications. The CHA5042 provides 29.5dBm nominal output power at 1dB gain compression over the 13-16GHz frequency range, and 26dB small-signal gain. Thi

Zener Diode, 1/2 Watt 짹5 Tolerance

Features: ● Zener Voltage 2.4 to 200V ● DO35 Package

DECT burst mode controller

GENERAL DESCRIPTION The PCD5042 DECT Burst Mode Controller (BMC) is a custom IC that performs the DECT Physical Layer and MAC Layer time-critical functions, for use in DECT base station products which comply with the following standards: • DECT CI part 2: Physical layer (DE/RES 3001-2) • DECT C

DECT burst mode controller

GENERAL DESCRIPTION The PCD5042 DECT Burst Mode Controller (BMC) is a custom IC that performs the DECT Physical Layer and MAC Layer time-critical functions, for use in DECT base station products which comply with the following standards: • DECT CI part 2: Physical layer (DE/RES 3001-2) • DECT C

1 AMP STEP-UP INTEGRATED SWITCHING REGULATOR

文件：203.87 Kbytes Page：3 Pages