HIGH POWER, HIGH SPEED SWITCHING APPLICATIONS / HAMMER DRIVE, PULSE MOTOR DRIVE AND INDUCTIVE LOAD SWITCHING

文件：339.16 Kbytes Page：7 Pages

HIGH POWER, HIGH SPEED SWITCHING APPLICATIONS / HAMMER DRIVE, PULSE MOTOR DRIVE AND INDUCTIVE LOAD SWITCHING

丝印代码：MP44019；CrM/DCM Multi-Mode PFC Controller with Second OVP

DESCRIPTION The MP44019 is a CrM/DCM multi-mode PFC controller that provides simple and highperformance active power factor correction using minimal external components. The device features a very low supply current. This allows the device to achieve low standby power loss. The typical no load p

丝印代码：MP44019；CrM/DCM Multi-Mode PFC Controller with Second OVP

DESCRIPTION The MP44019 is a CrM/DCM multi-mode PFC controller that provides simple and highperformance active power factor correction using minimal external components. The device features a very low supply current. This allows the device to achieve low standby power loss. The typical no load p

Boundary Mode PFC Controller

DESCRIPTION The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components. FEATURES • Boundary Conduction Mode PFC Controller for Pre-regulator • Zero-crossing Compensation to Mi

Boundary Mode PFC Controller

DESCRIPTION The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components. FEATURES • Boundary Conduction Mode PFC Controller for Pre-regulator • Zero-crossing Compensation to Mi

Boundary Mode PFC Controller

DESCRIPTION The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components. FEATURES • Boundary Conduction Mode PFC Controller for Pre-regulator • Zero-crossing Compensation to Mi

离线PFC控制器，具有带谐波注入的临界导通模式

MP44011是一款具有内部谐波注入功能的临界导通模式PFC控制器。它使用很少的外部组件，提供了简单而高性能的有源功率因数校正。与传统的临界导通模式PFC控制器相比，谐波注入功能使得该器件可应用于LED照明应用。在具有两级结构的LED照明应用中，谐波注入功能可以有效减小AC/DC与DC/DC级之间的总线电容。另外，谐波注入可以减小变压器尺寸，节省电路板空间并降低BOM成本。同样，谐波注入功能的优势也适用于一般升压或反激PFC应用。MP44011衍生自MP44010，但增加了谐波注入功能。MP44011 采用8引脚SOIC封装。 • 用于前置稳压器的临界导通模式 PFC 控制器\n• 降低总线电容\n• 减小变压器尺寸\n• 内部谐波注入功能\n• 精密可调的输出过压保护功能\n• 超低启动电流\n• 极低静态电流\n• 电流采样引脚上的集成滤波器\n• 禁用功能\n• 采用SOIC-8 封装;

临界导通模式离线 PFC 控制器

MP44014 是一款临界导通模式 PFC 控制器，能使用超少的外部元器件提供简单且高性能的有源功率因数校正。输出电压由具有精确内部电压基准的高性能电压模式放大器精确调节。精密可调的输出过压保护功能大大提高了系统的可靠性。 电流检测引脚上的单片 R/C 滤波器可取代外部 R/C 滤波器。极低的起动电流、静态电流和禁用功能可以降低功耗，使其具有极好的效率性能。MP44014 采用 SOIC-8 封装。 • 用于前置稳压器的临界导通模式 PFC 控制器\n• 过零补偿至 AC 输入电流最小谐波失真（THD）\n• 精密可调的输出过压保护功能\n• 超低启动电流（15μA）\n• 低静态电流（0.46mA）\n• 电流检测引脚上的集成滤波器\n• ZCS 引脚禁用功能\n• -750mA/+800mA 峰值栅极驱动电流\n• 采用 SOIC-8 封装;

CrM/DCM Multi-Mode PFC Controller with Second OVP

DESCRIPTION The MP44019 is a CrM/DCM multi-mode PFC controller that provides simple and highperformance active power factor correction using minimal external components. The device features a very low supply current. This allows the device to achieve low standby power loss. The typical no load p

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC PFC CTRLR BCM 8SOIC 集成电路（IC） PFC（功率因数校正）

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC PFC CTRLR BCM 8SOIC 集成电路（IC） PFC（功率因数校正）

Boundary-Mode PFC Controller with Harmonic Injection

文件：446.88 Kbytes Page：15 Pages

Boundary-Mode PFC Controller with Harmonic Injection

文件：446.88 Kbytes Page：15 Pages

Boundary Mode PFC Controller

文件：383.78 Kbytes Page：12 Pages

Boundary Mode PFC Controller

文件：420.05 Kbytes Page：13 Pages

丝印代码：MPS；Boundary Mode PFC Controller

文件：420.05 Kbytes Page：13 Pages

丝印代码：MPS；Boundary Mode PFC Controller

文件：383.78 Kbytes Page：12 Pages

High Output Xenon Flashlamp

Description The new FX-4400 Light Source from PerkinElmer Optoelectronics is a compact, high-output, long-life pulsed xenon flashlamp that offers exceptional arc stability, microsecond pulse durations and a high-intensity continuous line spectrum from the deep UV to the far IR. Features

GaAlAs Infrared Light Emitting Diode

GaAlAs Infrared Light Emitting Diode For optical control systems Features ● High-power output, high-efficiency : PO = 10 mW (typ.) ● Fast response and high-speed modulation capability : fC = 20 MHz (typ.) ● TO-18 standard type package

NPN switching transistor

DESCRIPTION NPN switching transistor in a SOT89 plastic package. PNP complement: PXT4403. FEATURES • High current (max. 600 mA) • Low voltage (max. 40 V). APPLICATIONS • Switching and linear amplification in industrial and consumer applications.

NPN switching transistor

DESCRIPTION NPN switching transistor in a SOT223 plastic package. PNP complement: PZT4403. FEATURES • High current (max. 600 mA) • Low voltage. APPLICATIONS • Switching and linear amplification in industrial and consumer applications.

Silicon NPN(PNP) epitaxial planer transistor

Silicon PNP epitaxial planer transistor For general amplification ■ Features ● Two elements incorporated into one package. ● Reduction of the mounting area and assembly cost by one half. ■ Basic Part Number of Element ● 2SB0709A(2SB709A) × 2 elements