15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • Halogen free available upon request by adding suffix -HF • Mounting Hole For #8 Screw • Plastic Case With Metal Bottom • Any Mounting Position • Surge Rating Of 300 Amps • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/Rohs Compliant

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Amperes FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw * Case: Epoxy case with Heat Sink internally Mounted in the Bridge encapsulation

整流桥

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes)

文件：28.54 Kbytes Page：2 Pages

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

文件：244.14 Kbytes Page：3 Pages

丝印代码：MP1541DJ；1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

丝印代码：MP1541DJ；1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

丝印代码：MP1541DJ；1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

丝印代码：MP1541GG；1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

丝印代码：MP1541GG；1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz, 18V Step-Up Converter

DESCRIPTION The MP1540 is a 5-pin thin TSOT23 current mode step-up converter intended for small, low power applications. The MP1540 switches at 1.3MHz and allo ws the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and exte

1.3MHz, 18V Step-Up Converter

DESCRIPTION The MP1540 is a 5-pin thin TSOT23 current mode step-up converter intended for small, low power applications. The MP1540 switches at 1.3MHz and allo ws the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and exte

1.3MHz, 18V Step-Up Converter

DESCRIPTION The MP1540 is a 5-pin thin TSOT23 current mode step-up converter intended for small, low power applications. The MP1540 switches at 1.3MHz and allo ws the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and exte

1.3MHz, 18V Step-Up Converter

DESCRIPTION The MP1540 is a 5-pin thin TSOT23 current mode step-up converter intended for small, low power applications. The MP1540 switches at 1.3MHz and allo ws the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and exte

1.3MHz, 18V Step-Up Converter

DESCRIPTION The MP1540 is a 5-pin thin TSOT23 current mode step-up converter intended for small, low power applications. The MP1540 switches at 1.3MHz and allo ws the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and exte

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

22V、1.3MHz，TSOT23-5 封装升压转换器

MP1541 是一款用于小功率、低功耗应用的电流控制模式升压转换器，采用 5 引脚薄款 SOT23 封装。MP1541 的开关频率为 1.3MHz，可使用小体积低成本的电容及 2mm 或更薄的电感。内部软启动使其具有较小的浪涌电流，从而可延长电池寿命。MP1541 输入电压可低至2.5V，可从 5V电源转换得到 12V，200mA 输出电流。MP1541 包含欠压锁定保护、限流保护和热过载保护，可防止输出过载时损坏芯片。MP1541 采用 5 引脚 TSOT23 封装或 QFN-8(2mmX2mm) 封装。 • 集成功率 MOSFET\n• 采用小体积电容和电感\n• 1.3MHz 固定开关频率\n• 内部补偿\n• 内部软启动\n• 工作输入电压可低至 2.5V，输出电压高至 22V\n• 可从 5V 转换得到 12V，200mA 输出\n• 欠压锁定保护、过温保护\n• 内部限流保护\n• 采用 TSOT23-5 封装或 QFN-8（2mmX2mm） 封装;

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a 5-pin thin SOT23 current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extend

1.3MHz Low Power LED Torch/Flash Driver

GENERAL DESCRIPTION The EV0062 is an evaluation board designed to drive up to four (4) white LEDs in series. The board is based on MPS’ MP1541 SOT23 current mode step up converter. The MP1541 is intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny,

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a 5-pin thin SOT23 current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extend

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery l

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18Ω internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

2A 电流， 700KHz/1.3MHz 频率升压转换器

MP1542 是一款带 2A、0.18Ω 内部开关管的电流控制模式升压转换器，提供具有快速响应功能的高效调节器。MP1542 的工作频率为 700KHz 或 1.3MHz，方便输出纹波和滤波设计。外部补偿引脚为用户提供了灵活的环路设计，允许其使用小尺寸低 ESR 陶瓷输出电容器。可外部电容器调节的软启动功能可有效控制输入浪涌电流容器编程。MP1542 输入电压可低至 2.5V，可从 5V 电源转换得到 12V，500mA 的输出电流。MP1542 包含欠压锁定保护、限流保护和热过载保护，以防止输出过载时损坏芯片。MP1542 采用薄款 8 引脚 MSOP 封装。 • 2A、0.18Ω、25V 功率 MOSFET\n• 使用小尺寸电容和电感\n• 引脚可选的 700KHz 或 1.3MHz 固定开关频率\n• 可编程的软启动功能\n• 输入电压低至 2.5V，输出电压高达 22V\n• 可将 5V 输入升至 12V，500mA 输出\n• 欠压锁定保护、过温保护\n• 内部限流保护\n• 采用 8 引脚 MSOP 封装;

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18Ω internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18Ω internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18Ω internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

1.5A, 500KHz Synchronous Rectified Step-up Converter

DESCRIPTION The MP1543 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect, inrush current limiting and internal soft-start. It includes an error amplifier, ramp generator, comparator, N-Channel switch and P-Channel synchronous rec

1.5A, 500KHz Synchronous Rectified Step-up Converter

DESCRIPTION The MP1543 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect, inrush current limiting and internal soft-start. It includes an error amplifier, ramp generator, comparator, N-Channel switch and P-Channel synchronous rec

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • UL Recognized File # E165989 • Mounting Hole For #8 Screw, Plastic Case with Metal Bottom • Surge Rating Of 300 Amps • Case to Terminal Isolation Voltage 2500V • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensit

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw

封装/外壳：SOT-23-5 细型，TSOT-23-5 功能：升压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG BOOST ADJ 200MA TSOT23-5 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：SOT-23-5 细型，TSOT-23-5 功能：升压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG BOOST ADJ 200MA TSOT23-5 集成电路（IC） 稳压器 - DC-DC 开关稳压器

1.3MHz Low Power Boost Converter

文件：151.4 Kbytes Page：4 Pages

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

MP1541 TFT Applications Evaluation Board

文件：209.82 Kbytes Page：5 Pages

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

4 Output DSL Power Supply

文件：272.62 Kbytes Page：5 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

MP1542 TFT Applications Evaluation Board

文件：221.9 Kbytes Page：5 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：175.45 Kbytes Page：4 Pages

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes FEATURES ● Plastic material used carries Underwriters Laboratory recognition 94V-O ● Low leakage ● Surge overload rating— 30~50 amperes peak ● Ideal for printed circuit board ● Exceeds environmental standards of MIL-S-19500/228

N-CHANNEL BROADBAND RF POWER MOSFET

Designed primarily for linear large–signal output stages in the 2.0–100 MHz frequency range. • Specified 50 Volts, 30 MHz Characteristics Output Power = 600 Watts Power Gain = 17 dB (Typ) Efficiency = 45 (Typ)

Silicon NPN Transistor High Voltage Video Output

Description: The NTE154 is a silicon NPN transistor in a TO39 type package designed for use as a video output to drive a color CRT. Features: • High Voltage: VCEO = 300V Min @ IC = 5mA • Low Capacitance: Cob = 3pF Max @ VCB = 20V • High Frequency: ft = 50MHz Min @ IC = 15mA • H

L-BAND SPDT SWITCH

DESCRIPTION The µPG154TB is an L-band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss. It housed in an original 6-pin super minimold package th

L-BAND SPDT SWITCH

DESCRIPTION The µPG154TB is an L-band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 100 MHz to 2.5 GHz, having the low insertion loss. It housed in an original 6-pin super minimold package th