50Usec, 12-bit Military A/D Converters

DESCRIPTION MN5200 Series devices are 12-bit, successive approximation A/D converters in industry-standard, 24-pin, dual-in-line packages.

50Usec, 12-bit Military A/D Converters

DESCRIPTION MN5200 Series devices are 12-bit, successive approximation A/D converters in industry-standard, 24-pin, dual-in-line packages.

50Usec, 12-bit Military A/D Converters

DESCRIPTION MN5200 Series devices are 12-bit, successive approximation A/D converters in industry-standard, 24-pin, dual-in-line packages.

4-/6-Channel Digital Potentiometers

GENERAL DESCRIPTION The AD5204/AD5206 provide 4-/6-channel, 256-position digitally controlled variable resistor (VR) devices. These devices perform the same electronic adjustment function as a potentiometer or variable resistor. Each channel of the AD5204/AD5206 contains a fixed resistor with a

2-Channel, 256-Position Digital Potentiometer

GENERAL DESCRIPTION The AD5207 provides dual channel, 256-position, digitally controlled variable resistor (VR) devices that perform the same electronic adjustment function as a potentiometer or variable resistor. Each channel of the AD5207 contains a fixed resistor with a wiper contact that ta

VERY LOW-COST VOICE SYNTHESIZER WITH 4-BIT MICROPROCESSOR

General Description The ASM5206C is very low cost voice synthesizer with 4-bit microprocessor. It has various features including 4-bit ALU, ROM, RAM,I/O ports, timers, clock generator, watchdog timer(WDT), voice synthesizer, etc. It consists of 22 instructions in the device. With CMOS technolog

150mA Low-Noise LDO Regulator

General Description The MIC5206 is an efficient linear voltage regulator with very low dropout voltage (typically 17mV at light loads and 165mV at 150mA), and very low ground current (600µA at 100mA output), with better than 1 initial accuracy. It has a logic compatible enable/shutdown control in

150mA Low-Noise LDO Regulator

General Description The MIC5206 is an efficient linear voltage regulator with very low dropout voltage (typically 17mV at light loads and 165mV at 150mA), and very low ground current (600µA at 100mA output), with better than 1 initial accuracy. It has a logic compatible enable/shutdown control in