3-STATE Octal D-Type Edge-Triggered Flip-Flop

General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large outpu

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 功能：标准 包装：管件 描述：IC FF D-TYPE SNGL 8BIT 20TSSOP 集成电路（IC） 触发器

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

Octal 3?뭆tate Noninverting D Flip?묯lop

Octal 3−State Noninverting D Flip−Flop High−Performance Silicon−Gate CMOS The 74HC574 is identical in pinout to the LS574. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. Data meeting the set−up time is clocked to the

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere