Termination-Insensitive Mixer 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

Termination-Insensitive Mixer, 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

Termination-Insensitive Mixer, 1 - 7 GHz

Description\nThe unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good m • Intermodulation Ratio Insensitive to IF Ports Mismatches\n• Impedance: 50 Ohms Nominal\n• Low Power: +24 dBm Max.\n• MIL-STD-883 Screening Available ;

Termination-Insensitive Mixer

文件：80.91 Kbytes Page：3 Pages

Termination-Insensitive Mixer 1 - 7 GHz

Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a go

(non-RoHS) Termination Insensitive

The MDC-162-SMA unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good ma ·Intermodulation Ratio Insensitive to IF Ports Mismatches\n·MIL-STD-883 Screening Available\n·Low Power: +24 dBm Max.\n·Maximum Input Power: 350 mW max. @ 25°C, Derated 3.5 mW/°C\n·Impedance: 50 Ohms Nominal\n·Conversion Loss: 6 dB Typical Midband;

Termination-Insensitive Mixer

文件：80.91 Kbytes Page：3 Pages

封装/外壳：模块，SMA 连接器 包装：盒 描述：MIXER,TB,MW,TIM RF/IF，射频/中频和 RFID 射频混频器

GaAs Infrared Light Emitting Diode

GaAs Infrared Light Emitting Diode For optical control systems Features ● High-power output, high-efficiency : PO = 3.5 mW (typ.) ● Infrared light emission close to monochromatic light : λP = 950 nm (typ.) ● Small ceramic package

Silicon epitaxial planar type

Silicon epitaxial planar type For switching circuits ■ Features • Short reverse recovery time trr • Small terminal capacitance, Ct

Silicon MOS IC

Silicon NPN Transistor TV Vertical Deflection

Description: The NTE162 is an NPN transistor in a TO3 type case designed for medium–to–high voltage inverters, converters, regulators, and switching circuits. Features: • High Voltage: VCEX = 400V • Gain Specified to 3.5A • High Frequency Response to 2.5MHz

POWER TRANSISTORS(10A,320-380V,125W)