SAW Antenna Duplexer (700 to 1000 MHz)

GENERAL DESCRIPTION The MBF9041BB is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz. This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG. This helps to save the space and weight greatly in the target application such as mobile telephone.

SAW Antenna Duplexer (700 to 1000 MHz)

Micropower, Single-Supply, UCSP/SOT23 Comparator Precision Reference ICs

General Description The MAX9038–MAX9043 and MAX9050–MAX9053 feature combinations of low-power comparators and precision voltage references. Their operating voltage range makes them ideal for both 3V and 5V systems. Features ● Comparator + Precision Reference in UCSP/SOT23 ● 2.5V to 5.5V Single

Multiple Output Trunk PLL

Description The MT9041 is a digital phase-locked loop (PLL) designed to provide timing and synchronization signals for T1 and E1 primary rate transmission links that are compatible with ST-BUS/GCI frame alignment timing requirements. The PLL outputs can be synchronized to either a 2.048 MHz, 1.

Multiple Output Trunk PLL

Description The MT9041 is a digital phase-locked loop (PLL) designed to provide timing and synchronization signals for T1 and E1 primary rate transmission links that are compatible with ST-BUS/GCI frame alignment timing requirements. The PLL outputs can be synchronized to either a 2.048 MHz, 1.

T1/E1 System Synchronizer

Description The MT9041B T1/E1 System Synchronizer contains a digital phase-locked loop (DPLL), which provides timing and synchronization signals for multitrunk T1 and E1 primary rate transmission links. The MT9041B generates ST-BUS clock and framing signals that are phase locked to either a

T1/E1 System Synchronizer

Description The MT9041B T1/E1 System Synchronizer contains a digital phase-locked loop (DPLL), which provides timing and synchronization signals for multitrunk T1 and E1 primary rate transmission links. The MT9041B generates ST-BUS clock and framing signals that are phase locked to either a