SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volts CURRENT 3.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Metal to si

3.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

文件：104.03 Kbytes Page：2 Pages

功率肖特基二极管(IF ≧ 1A)

Switching Regulator Controller (Low Voltage)

■DESCRIPTION The MB3800 is a single-channel switching regulator control IC for low voltage applications incorporating a soft start function and short circuit detection function. The device has a low minimum operating voltage of 1.8 V and is ideal for the power supply of battery-operated electro

Switching Regulator Controller (Low Voltage)

■DESCRIPTION The MB3800 is a single-channel switching regulator control IC for low voltage applications incorporating a soft start function and short circuit detection function. The device has a low minimum operating voltage of 1.8 V and is ideal for the power supply of battery-operated electro

Switching Regulator Controller (Low Voltage)

■DESCRIPTION The MB3800 is a single-channel switching regulator control IC for low voltage applications incorporating a soft start function and short circuit detection function. The device has a low minimum operating voltage of 1.8 V and is ideal for the power supply of battery-operated electro

Switching Regulator Controller (Low Voltage)

■DESCRIPTION The MB3800 is a single-channel switching regulator control IC for low voltage applications incorporating a soft start function and short circuit detection function. The device has a low minimum operating voltage of 1.8 V and is ideal for the power supply of battery-operated electro

Power Management Switch

■ DESCRIPTION The MB3802 is a power management switch incorporating two switch circuits with extremely low ON resistance. NO diode is required because the switch block is configured with an N-ch MOS to prevent reverse current at switch OFF. The MB3802 starts at a very low voltage (typical VIN >

Power Management Switching IC (with flash memory power switching function)

DESCRIPTION When data is written to or read from flash memory, it requires that the voltage at its power supply (VPP) be switched (to 12 V for writing and to 3.3 or 5.0 V for reading). The MB3807A is a power management switching IC, designed to be compatible with the PCMCIA digital controller, t

Power Management Switching IC (with flash memory power switching function)

DESCRIPTION When data is written to or read from flash memory, it requires that the voltage at its power supply (VPP) be switched (to 12 V for writing and to 3.3 or 5.0 V for reading). The MB3807A is a power management switching IC, designed to be compatible with the PCMCIA digital controller, t

Power Management Switching IC (with flash memory power switching function)

DESCRIPTION When data is written to or read from flash memory, it requires that the voltage at its power supply (VPP) be switched (to 12 V for writing and to 3.3 or 5.0 V for reading). The MB3807A is a power management switching IC, designed to be compatible with the PCMCIA digital controller, t

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Switching Regulator Controller

■ DESCRIPTION The MB3817 is a pulse width modulator (PWM) type switching regulator controller IC designed for low-voltage and high-speed operation. This can be used in applications as down-conversion or down/up-conversion (Zeta method) . With fewer external components and faster operating speed,

Switching Regulator Controller

■ DESCRIPTION The MB3817 is a pulse width modulator (PWM) type switching regulator controller IC designed for low-voltage and high-speed operation. This can be used in applications as down-conversion or down/up-conversion (Zeta method) . With fewer external components and faster operating speed,

2-ch DC/DC Converter IC With Synchronous Rectifier

■ DESCRIPTION The MB3821 is a pulse width modulation (PWM) type 2-channel DC/DC converter IC with synchronous rectification designed for low voltage, high efficiency operation in high precision and high frequency applications, ideal for down conversion. A normal/low-power mode selection is provi

2-ch DC/DC Converter IC With Synchronous Rectifier

■ DESCRIPTION The MB3821 is a pulse width modulation (PWM) type 2-channel DC/DC converter IC with synchronous rectification designed for low voltage, high efficiency operation in high precision and high frequency applications, ideal for down conversion. A normal/low-power mode selection is provi

6-ch DC/DC Converter IC With Synchronous Rectifier

DESCRIPTION The MB3825A is a pulse width modulation (PWM) type 6-channel DC/DC converter IC with synchronous rectification (2-channels) designed for low voltage, high efficiency operation in high precision and high frequency applications, ideal for down conversion. The MB3825A is an ideal device

6-ch DC/DC Converter IC With Synchronous Rectifier

DESCRIPTION The MB3825A is a pulse width modulation (PWM) type 6-channel DC/DC converter IC with synchronous rectification (2-channels) designed for low voltage, high efficiency operation in high precision and high frequency applications, ideal for down conversion. The MB3825A is an ideal device

6-ch DC/DC Converter IC With Synchronous Rectifier

DESCRIPTION The MB3825A is a pulse width modulation (PWM) type 6-channel DC/DC converter IC with synchronous rectification (2-channels) designed for low voltage, high efficiency operation in high precision and high frequency applications, ideal for down conversion. The MB3825A is an ideal device

6-ch DC/DC Converter IC With Synchronous Rectification for voltage step-up and step-down

■ DESCRIPTION The MB3827 is a pulse width modulation (PWM) type 6-channel DC/DC converter IC with, synchronous rectification for voltage step-up and step-down. The MB3827 is ideal for low voltage, high efficiency, compact applications and for down conversion and up/down conversion (with two types

6-ch DC/DC Converter IC With Synchronous Rectification for voltage step-up and step-down

■ DESCRIPTION The MB3827 is a pulse width modulation (PWM) type 6-channel DC/DC converter IC with, synchronous rectification for voltage step-up and step-down. The MB3827 is ideal for low voltage, high efficiency, compact applications and for down conversion and up/down conversion (with two types

Pentium DC/DC Converter IC

■ DESCRIPTION The FUJITSU MB3828 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 3.5 V output voltages for Pentium®* CPU’s, using a 5-bit input signal information. The MB3828 utilizes synchronous rectification for high efficiency and features a sof

Pentium DC/DC Converter IC

■ DESCRIPTION The FUJITSU MB3828 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 3.5 V output voltages for Pentium®* CPU’s, using a 5-bit input signal information. The MB3828 utilizes synchronous rectification for high efficiency and features a sof

System Power Supply IC for Mobile Telephone

DESCRIPTION This power supply IC incorporates a 4-channel series regulator and a battery backup function. It is a multi-function power supply IC with an output control function and momentary power-loss detection circuit, which are both required for mobile telephones. It also incorporates a speake

System Power Supply IC for Mobile Telephone

DESCRIPTION This power supply IC incorporates a 4-channel series regulator and a battery backup function. It is a multi-function power supply IC with an output control function and momentary power-loss detection circuit, which are both required for mobile telephones. It also incorporates a speake

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3832A is a pulse width modulation (PWM) DC/DC converter IC, incorporating a current detector amplifier and error amplifiers (2 circuits) to control the output voltage and current independently. It is suitable for downconversion. With an on-chip reference voltage generator, th

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3832A is a pulse width modulation (PWM) DC/DC converter IC, incorporating a current detector amplifier and error amplifiers (2 circuits) to control the output voltage and current independently. It is suitable for downconversion. With an on-chip reference voltage generator, th

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Li-Ion Battery Protection IC

DESCRIPTION The MB3836 is a lithium-ion battery protection IC for three cells series lithium-ion battery pack in a notebook PC’s. This IC supports charging at 12.6 V and detects an over-charge, over-discharge, and over-current to control charging and discharging. The IC has a built-in function t

Li-Ion Battery Protection IC

DESCRIPTION The MB3836 is a lithium-ion battery protection IC for three cells series lithium-ion battery pack in a notebook PC’s. This IC supports charging at 12.6 V and detects an over-charge, over-discharge, and over-current to control charging and discharging. The IC has a built-in function t

Power Management Switch IC

■ DESCRIPTION The FUJITSU MB3841 is a one-channel power management switch IC with extremely low on resistance. The MB3841 is designed for a variety of switching applications, featuring operation from low input voltages (VIN > 2.2 V) and stable on resistance that does not depend on input voltage.

Power Management Switch IC

■ DESCRIPTION The FUJITSU MB3841 is a one-channel power management switch IC with extremely low on resistance. The MB3841 is designed for a variety of switching applications, featuring operation from low input voltages (VIN > 2.2 V) and stable on resistance that does not depend on input voltage.

Power Management 2-ch Switch IC

■DESCRIPTION The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active op

Power Management 2-ch Switch IC

■DESCRIPTION The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active op

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)

■DESCRIPTION The FUJITSU MB3813A/33A/43 is a pulse width modulation (PWM) DC/DC converter IC with independent outputvoltage and current setting capability. The use of on-chip output setting resistance enables high precision output voltage control. Also, an output voltage switching feature fo

Power Management 2-ch Switch IC

■DESCRIPTION The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active op

Power Management 2-ch Switch IC

■DESCRIPTION The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active op

Power Management 2-ch Switch IC

■DESCRIPTION The MB3842/3845 is a power management switch with built-in 2-channel low-on resistance (typ. 100mΩ) switch. Output control is by means of a control signal, and the MB3842 is designed for high-active operation (output on when EN is Hi), while the MB3845 is designed for low-active op

1A Motor Drive IC for Motor Applications

■ DESCRIPTION The FUJITSU MB3853 is a motor drive IC with two power driver channels capable of sink/source operation, for use in two-channel independent operation or H-type drive operation. The control system and output system have independent power supplies, allowing the control system to be se

1A Motor Drive IC for Motor Applications

■ DESCRIPTION The FUJITSU MB3853 is a motor drive IC with two power driver channels capable of sink/source operation, for use in two-channel independent operation or H-type drive operation. The control system and output system have independent power supplies, allowing the control system to be se

DUAL REVERSIBLE MOTOR DRIVER

■ DESCRIPTION The MB3863 is an IC motor driver with two independent reverse control functions. It drives motor drives of front-loading VTRs and auto-reverse cassette decks and stepping motors by reversible control at TTL and CMOS levels. A heat protection circuit is incorporated to prevent damag

Pentium II DC/DC Converter IC

■ DESCRIPTION The FUJITSU MB3870 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 3.5 V output voltages for Pentium®* CPU’s, using a 5-bit input signal information. The MB3870 utilizes synchronous rectification for high efficiency and features a sof

Pentium II DC/DC Converter IC

■ DESCRIPTION The FUJITSU MB3870 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 3.5 V output voltages for Pentium®* CPU’s, using a 5-bit input signal information. The MB3870 utilizes synchronous rectification for high efficiency and features a sof

Mobile Pentium II DC/DC Converter IC

DESCRIPTION The FUJITSU MB3871 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 2.0 V output voltages for Mobile Pentium® II* CPU’s, using a 4-bit input signal information. The MB3871 utilizes synchronous rectification for high efficiency and featur

Mobile Pentium II DC/DC Converter IC

DESCRIPTION The FUJITSU MB3871 is a pulse width modulation (PWM) DC/DC converter IC chip that provides a selection of 1.3 V to 2.0 V output voltages for Mobile Pentium® II* CPU’s, using a 4-bit input signal information. The MB3871 utilizes synchronous rectification for high efficiency and featur

Multi-Resonance AC/DC Converter IC

■ DESCRIPTION The MB3873 is a pulse frequency modulation (PFM) type multi-resonance AC/DC converter IC providing soft switching functions in a more compact, higher-efficiency, low-noise package. Since this product allows reduced number of the components and reduced size of the transformer, it is

Multi-Resonance AC/DC Converter IC

■ DESCRIPTION The MB3873 is a pulse frequency modulation (PFM) type multi-resonance AC/DC converter IC providing soft switching functions in a more compact, higher-efficiency, low-noise package. Since this product allows reduced number of the components and reduced size of the transformer, it is

DC/DC Converter IC for Parallel Charging

■ DESCRIPTION The MB3874 and MB3876 are parallel charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detect

DC/DC Converter IC for Parallel Charging

■ DESCRIPTION The MB3874 and MB3876 are parallel charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detect

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3875 and MB3877 are charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detecting a voltage

DC/DC Converter IC for Parallel Charging

■ DESCRIPTION The MB3874 and MB3876 are parallel charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detect

DC/DC Converter IC for Parallel Charging

■ DESCRIPTION The MB3874 and MB3876 are parallel charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detect

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3875 and MB3877 are charging DC/DC converter ICs suitable for down-conversion, which uses pulse width modulation (PWM) for controlling the output voltage and current independently. These ICs can dynamically control the secondary battery’s charge current by detecting a voltage

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3878 is a DC/DC converter IC suitable for down-conversion, using pulse-width (PWM) charging and enabling output voltage to be set to any desired level from one cell to four cells. These ICs can dynamically control the secondary battery’s charge current by detecting a voltage

DC/DC Converter IC for Charging

■ DESCRIPTION The MB3878 is a DC/DC converter IC suitable for down-conversion, using pulse-width (PWM) charging and enabling output voltage to be set to any desired level from one cell to four cells. These ICs can dynamically control the secondary battery’s charge current by detecting a voltage

DC/DC Converter IC for Parallel Charging of 3/4 cell Li-ion & NiMH Batteries

DESCRIPTION The MB3879 is a DC/DC converter IC for parallel charging of 3/4 cell Li-ion & NiMH batteries, which uses the pulse-width modulation (PWM) for controlling output voltages and output currents independently. This IC can dynamically control secondary batterie’s charge current, which