SC70, 5ns, Low-Power, Single-Supply, Precision TTL Comparators

General Description The MAX9010/MAX9011/MAX9013 single and MAX9012 dual, high-speed comparators operate from a single 4.5V to 5.5V power supply and feature low-current consumption. They have precision differential inputs and TTL outputs. They feature short propagation delay (5ns, typ), low-supp

SC70封装、5ns、低功耗、单电源、高精度TTL比较器

MAX9010/MAX9011/MAX9013单通道和MAX9012双通道高速比较器采用4.5V至5.5V单电源供电，电流消耗较低。它们具有精密差分输入和TTL输出，短传播延迟（5ns，典型值）、低电源电流和包括接地在内的宽共模输入范围，非常适合低功耗、高速、单电源应用。\n\n 当使用传送缓慢或低输入过驱信号驱动时，比较器输出在整个线性区内保持稳定，从而消除了其他高速比较器常见的输出不稳定性。输入电压范围扩展至地电压以下200mV，且无输出反相。MAX9013具有互补输出，MAX9011/MAX9013均具有锁存使能输入(LE)。MAX9013是行业标准MAX913和LT1016/ • 超快、5ns传播延迟\n\n• 低静态电流：\n• 900µA (MAX9010/MAX9011)\n\n• 1.3mA (MAX9013)\n\n• 2.4mA (MAX9012)\n\n\n\n\n• 4.5V至5.5V单电源应用\n\n• 输入范围扩展至地电压以下\n\n• 无最小输入信号压摆率要求\n\n• 开关期间无电源电流尖峰\n\n• 使用传送缓慢的输入驱动时保持稳定\n\n• 过驱输入无输出反相\n\n• TTL兼容输出（MAX9013的补充）\n\n• 包含锁存功能(MAX9011/MAX9013)\n\n• 高精度比较器\n• 输入失调电压：0.7mV\n\n• 电压增;

SC70, 5ns, Low-Power, Single-Supply, Precision TTL Comparators

General Description The MAX9010/MAX9011/MAX9013 single and MAX9012 dual, high-speed comparators operate from a single 4.5V to 5.5V power supply and feature low-current consumption. They have precision differential inputs and TTL outputs. They feature short propagation delay (5ns, typ), low-supp

4 x E1/T1 Fiber Mux/De-mux over One Fiber Optic Cable

DESCRIPTION The ACS406CS comprises a chip set of two highly integrated devices, the ACS9010 and ACS4060. The ACS9010 is an analog transceiver device and the ACS4060 is a mixed signal device. FEATURES • Two chip set supporting full duplex serial data transmission up to 8.448Mbps over one fiber

1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is

1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is

1, 2, and 4k bit EEPROMs for direct connection to serial ports

• Overview The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is

Engine Knock Signal Processor

The HIP9010 is used to provide a method of detecting premature detonation or “Knock” in automotive engines. A block diagram of this IC is shown in Figure 1. The chip alternately selects one of the two sensors mounted on the engine block. Two programmable bandpass filters process the signal from b