1.2A、限流型、高边P沟道开关，带有热关断

The MAX890L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input supply against overload. Th \n• +2.7V to +5.5V Input Range \n• Programmable Current Limit \n• Low Quiescent Current\n• 10µA (typ) at VIN = 3.3V \n• 0.1µA (typ) with Switch Off\n• Thermal Shutdown \n• Active-Low FAULT Indicator Output \n• 0.09Ω (typ) On-Resistance;

1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

文件：453.59 Kbytes Page：8 Pages

1.2A开关模式Li+充电器，具有±22V输入额定电压和JEITA电池温度监测

MAX8900_是高频、开关模式充电器，用于单节锂离子(Li+)或锂聚合物(Li-Poly)电池。器件从3.4V至6.3V (MAX8900A/MAX8900C)或3.4V至8.7V (MAX8900B)电源产生高达1.2A的电流为电池充电。3.25MHz开关模式充电器能够使用极小的元件并具有极低的发热，可理想用于耳机、超便携媒体播放器等小型手持设备。\n\n MAX8900_的若干特性使其非常适合高可靠性系统。MAX8900_可承受高达+22V以及低至-22V的输入电压。电池保护功能包括低压预充、充电器故障定时器、管芯温度监测和电池温度检测。电池温度监测按照JEITA*规范规定的安 • 工作在3.25MHz开关频率的Li+/Li聚合物电池充电器\n• 电池温度监测器按照JEITA要求调节充电电流和终止电压4.2V ±0.5%电池调节电压(可根据需要订购4.1V电压的产品)\n• 可调节充电终止电流门限\n• 10mA至200mA可调\n• 10mA时精度可达±1mA\n\n\n• 高效率、低功耗\n• 采用2.0mm x 1.6mm电感\n• 提供正、负输入电压保护(±22V)\n• 高达+20V的工作电压范围(可根据需要订购其它OVLO范围的产品) \n• 支持无电池工作\n• 故障定时器\n• 充电状态指示输出\n• 2.44mm x 2.67mm x 0.6;

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

General Description The MAX8900_ is a high-frequency, switch-mode charger for a 1-cell lithium ion (Li+) or lithium polymer (Li-Poly) battery. It delivers up to 1.2A of current to the battery from 3.4V to 6.3V (MAX8900A/MAX8900C) or 3.4V to 8.7V (MAX8900B). The 3.25MHz switch-mode charger is idea

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

General Description The MAX8900_ is a high-frequency, switch-mode charger for a 1-cell lithium ion (Li+) or lithium polymer (Li-Poly) battery. It delivers up to 1.2A of current to the battery from 3.4V to 6.3V (MAX8900A/MAX8900C) or 3.4V to 8.7V (MAX8900B). The 3.25MHz switch-mode charger is idea

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

General Description The MAX8900_ is a high-frequency, switch-mode charger for a 1-cell lithium ion (Li+) or lithium polymer (Li-Poly) battery. It delivers up to 1.2A of current to the battery from 3.4V to 6.3V (MAX8900A/MAX8900C) or 3.4V to 8.7V (MAX8900B). The 3.25MHz switch-mode charger is idea

1.2A开关模式Li+充电器，具有±22V输入额定电压和JEITA电池温度监测

MAX8900_是高频、开关模式充电器，用于单节锂离子(Li+)或锂聚合物(Li-Poly)电池。器件从3.4V至6.3V (MAX8900A/MAX8900C)或3.4V至8.7V (MAX8900B)电源产生高达1.2A的电流为电池充电。3.25MHz开关模式充电器能够使用极小的元件并具有极低的发热，可理想用于耳机、超便携媒体播放器等小型手持设备。\n\n MAX8900_的若干特性使其非常适合高可靠性系统。MAX8900_可承受高达+22V以及低至-22V的输入电压。电池保护功能包括低压预充、充电器故障定时器、管芯温度监测和电池温度检测。电池温度监测按照JEITA*规范规定的安 • 工作在3.25MHz开关频率的Li+/Li聚合物电池充电器\n• 电池温度监测器按照JEITA要求调节充电电流和终止电压4.2V ±0.5%电池调节电压(可根据需要订购4.1V电压的产品)\n• 可调节充电终止电流门限\n• 10mA至200mA可调\n• 10mA时精度可达±1mA\n\n\n• 高效率、低功耗\n• 采用2.0mm x 1.6mm电感\n• 提供正、负输入电压保护(±22V)\n• 高达+20V的工作电压范围(可根据需要订购其它OVLO范围的产品) \n• 支持无电池工作\n• 故障定时器\n• 充电状态指示输出\n• 2.44mm x 2.67mm x 0.6;

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

General Description The MAX8900_ is a high-frequency, switch-mode charger for a 1-cell lithium ion (Li+) or lithium polymer (Li-Poly) battery. It delivers up to 1.2A of current to the battery from 3.4V to 6.3V (MAX8900A/MAX8900C) or 3.4V to 8.7V (MAX8900B). The 3.25MHz switch-mode charger is idea

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

General Description The MAX8901A/MAX8901B step-up converters drive from two to six series-connected white LEDs (WLEDs) with constant current to provide uniform WLED intensity for LCD backlighting in cell phones, PDAs, and other handheld devices. The MAX8901_ operate at a fixed 750kHz (typ) switch

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

General Description The MAX8901A/MAX8901B step-up converters drive from two to six series-connected white LEDs (WLEDs) with constant current to provide uniform WLED intensity for LCD backlighting in cell phones, PDAs, and other handheld devices. The MAX8901_ operate at a fixed 750kHz (typ) switch

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

General Description The MAX8901A/MAX8901B step-up converters drive from two to six series-connected white LEDs (WLEDs) with constant current to provide uniform WLED intensity for LCD backlighting in cell phones, PDAs, and other handheld devices. The MAX8901_ operate at a fixed 750kHz (typ) switch

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

General Description The MAX8901A/MAX8901B step-up converters drive from two to six series-connected white LEDs (WLEDs) with constant current to provide uniform WLED intensity for LCD backlighting in cell phones, PDAs, and other handheld devices. The MAX8901_ operate at a fixed 750kHz (typ) switch

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

丝印代码：ABG；Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

丝印代码：ABH；Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

General Description The MAX8902A/MAX8902B low-noise linear regulators deliver up to 500mA of output current with only 16µVRMS of output noise in a 100kHz bandwidth. These regulators maintain their output voltage over a wide input range, requiring only 100mV of input-to-output headroom at full l

2A 1-Cell Li DC-DC Charger for USB* and Adapter Power

The MAX8903A is an integrated 1-cell Li+ charger and Smart Power Selector with dual (AC adapter and USB) power inputs. The switch mode charger uses a high switching frequency to eliminate heat and allow tiny external components. It can operate with either separate inputs for USB and AC adapter pow

2A 1-Cell Li DC-DC Charger for USB* and Adapter Power

The MAX8903A is an integrated 1-cell Li+ charger and Smart Power Selector with dual (AC adapter and USB) power inputs. The switch mode charger uses a high switching frequency to eliminate heat and allow tiny external components. It can operate with either separate inputs for USB and AC adapter pow

2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage rang

1A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX890L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

1A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX890L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

1A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX890L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

1A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX890L smart, low-voltage, P-channel, MOSFET power switch is intended for high-side load-switching applications. This switch operates with inputs from +2.7V to +5.5V, making it ideal for both +3V and +5V systems. Internal current-limiting circuitry protects the input su

Three Status LED Indicators

文件：3.29718 Mbytes Page：15 Pages

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：4.86937 Mbytes Page：35 Pages

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：3.53936 Mbytes Page：35 Pages

Three Status LED Indicators

文件：3.29718 Mbytes Page：15 Pages

Three Status LED Indicators

文件：3.29718 Mbytes Page：15 Pages

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：3.53936 Mbytes Page：35 Pages

封装/外壳：30-WFBGA，WLBGA 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BATT CHG LI-ION 1CELL 30WLP 集成电路（IC） 电池充电器

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：4.86937 Mbytes Page：35 Pages

Three Status LED Indicators

文件：3.29718 Mbytes Page：15 Pages

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：3.53936 Mbytes Page：35 Pages

封装/外壳：30-WFBGA，WLBGA 包装：卷带（TR） 描述：IC BATT CHG LI-ION 1CELL 30WLP 集成电路（IC） 电池充电器

1.2A Switch-Mode Li Chargers with 짹22V Input Rating and JEITA Battery Temperature Monitoring

文件：4.86937 Mbytes Page：35 Pages

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

文件：303.04 Kbytes Page：14 Pages

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

文件：303.04 Kbytes Page：14 Pages

Highest Efficiency Supply for 2 to 6 Series WLEDs in a 2mm x 2mm TDFN Package

文件：303.04 Kbytes Page：14 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：360.95 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：266.73 Kbytes Page：11 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：360.45 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：266.73 Kbytes Page：11 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：360.95 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：378.11 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：360.95 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

丝印代码：ABG；Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：266.73 Kbytes Page：11 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：355.01 Kbytes Page：9 Pages

Low-Noise 500mA LDO Regulators in a 2mm x 2mm TDFN Package

文件：266.73 Kbytes Page：11 Pages