2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage rang

2A、限流型、高边P沟道开关，带有热关断

MAX869L P沟道负载开关具有准确的用户设置限流值和低导通电阻。该开关可通过限制电流并防止系统电源被拉低来保护您的电源免受短路和浪涌的影响。输入电压范围为2.7V至5.5V。\n\n MAX869L具有通过逻辑信号控制的2A、45mΩ开关。限流值精度为±21%，可使用单个电阻设置为400mA至2.4A。\n\n 该器件具有12µA的低静态电源电流，在关断状态下降至2µA（最大值）。它具有热关断保护功能和逻辑信号输出引脚（低电平有效FAULT），可在出现过流或过温情况时发出信号。\n\n   • 尺寸非常小（16引脚QSOP与8引脚SO尺寸相同）\n\n• 低电阻：45mΩ，3V\n\n• ±21%精度、用户设置限流值\n\n• 静态电流：12µA（典型值）\n\n• 关断电流：0.01µA（典型值）\n\n• 开关关闭时输出漏电流：0.04µA（典型值）\n\n• 输入范围：2.7V至5.5V\n\n• 热关断\n\n• 低电平有效FAULT输出;

2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage rang

2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage rang

2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage rang

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC PWR SWITCH P-CHAN 1:1 16QSOP 集成电路（IC） 配电开关，负载驱动器

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC PWR SWITCH P-CHAN 1:1 16QSOP 集成电路（IC） 配电开关，负载驱动器

2 A, High-Side P-Channel Switch with Current Limit and Thermal Shutdown

GENERAL DESCRIPTION The ADM869L is a logic controlled P-channel switch with low on resistance, capable of sourcing up to 2 A from supply voltages between 2.7 V and 5.5 V. A user-settable current limit allows the trip current to be set between 400 mA and 2 A with an accuracy of ±21. This allows th

NPN high-voltage transistors

DESCRIPTION NPN transistors in a TO-202 plastic package. PNP complement: BF872. FEATURES • Low feedback capacitance. APPLICATIONS • For use in class-B video output stages in colour television receivers.

NPN SILICON PLANAR HIGH CURRENT (HIGH PERFORMANCE) TRANSISTOR

FEATURES * Extremely low equivalent on-resistance; RCE(sat)36mΩ at 5A * 7 Amp continuous collector current (20 Amp peak) * Very low saturation voltages * Excellent gain charateristics specified upto 20 Amp * Ptot =3 Watts PARTMARKING DETAILS - FZT869

Integrated Circuit Dual, High Speed, Programmable Current Mode (Norton) Amp

Description: The NTE869 consists of two current differencing (Norton) input amplifiers. Emphasis has been placed on obtaining high frequency performance and providing user programmable amplifier operating characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, f

NPN SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR

FEATURES * 25 Volt VCEO * 5 Amps continuous current * Up to 20 Amps peak current * Very low saturation voltage * High Gain * Ptot=1.2 Watts