50mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

General Description The MAX860/MAX861 charge-pump voltage converters invert input voltages ranging from +1.5V to +5.5V, or double input voltages ranging from +2.5V to +5.5V. Because of their high switching frequencies, these devices use only two small, low-cost capacitors. Their 50mA output makes

50mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

文件：184.85 Kbytes Page：11 Pages

50mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

文件：174.34 Kbytes Page：11 Pages

N-channel junction FETs

DESCRIPTION N-channel symmetrical junction field effect transistors in a SOT23 package. FEATURES • High transfer admittance • Low input capacitance • Low feedback capacitance • Low noise. APPLICATIONS • Preamplifiers for AM tuners in car radios.

N-channel junction FETs

DESCRIPTION N-channel symmetrical junction field effect transistors in a SOT23 package. FEATURES • High transfer admittance • Low input capacitance • Low feedback capacitance • Low noise. APPLICATIONS • Preamplifiers for AM tuners in car radios.

UHF linear push-pull power transistor

DESCRIPTION NPN silicon planar epitaxial transistor with two sections in push-pull configuration. The device is encapsulated in a SOT289A 4-lead rectangular flange package, with a ceramic cap. FEATURES • Double stage internal input and output matching networks for an optimum wideband capabi

Integrated Circuit Quad, Normally Open, SPST JFET Analog Switch w/Disable

Description: The NTE861 is a monolithic combination of bipolar and JFET technology producing a one chip quad JFET switch. A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of ±10V. The input is designed to operate from minimum TTL levels, and s

RAIL TO RAIL MICROPOWER BICMOS COMPARATORS

DESCRIPTION The TS86x (Single, Dual & Quad) is a Rail to Rail comparator characterized for 2.7V to 10V operation over -40°C to +85°C temperature range. It exhibits an excellent speed to power ratio, featuring a current consumption of 6µA per comparator and a response time of 500ns at 2.7V for