位置:首页 > IC中文资料 > MAX6471

型号 功能描述 生产厂家 企业 LOGO 操作
MAX6471

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

MAX6471

300mA LDO线性稳压器,内置微处理器复位电路

MAX6469–MAX6484是低压差线性稳压器,具有完全集成的微处理器复位电路。它们均具有+1.5V至+3.3V预置输出电压,预置间隔100mV,并可提供最高300mA的负载电流。这些器件仅消耗82µA电源电流。低电源电流、低压差和集成的复位功能使这些器件非常适合电池供电的便携式设备。\nMAX6469–MAX6484包含一个复位输出,用于指示稳压器输出是否跌落至标准微处理器电源容限以下(-7.5%或-12.5%标称输出电压),省去了外部微处理器监控电路,并保证电源电压和时钟振荡器在处理器使能之前达到稳定。这些器件提供推挽式或漏极开路、低电平有效复位输出,具有2.5ms、20 • 3 x 3 UCSP、6引脚SOT23或8引脚TDFN封装 \n• +1.5V至+3.3V预置输出电压(预置间隔100mV) \n• SET引脚用于调节输出电压 \n• 75µVRMS LDO输出电压噪声(MAX6477–MAX6484) \n• 整个工作温度范围内精度为±2.0% \n• 保证提供300mA输出电流 \n• 低压差 \n• 150mA时55mV \n• 300mA时114mV \n• 82µA电源电流,0.1µA关断电流 \n• 反向输入电流保护、过热和短路防护 \n• 微处理器复位信号,具有4种超时选项 \n• 推挽式或漏极开路的/RESET输出 \n• 手动复;

AD

亚德诺

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit

General Description The MAX6469–MAX6484 are low-dropout linear regulators with a fully integrated microprocessor reset circuit. Each is available with preset output voltages from +1.5V to +3.3V in 100mV increments and delivers up to 300mA of load current. These devices consume only 82µA of supply

MAXIM

美信

封装/外壳:8-WDFN 裸露焊盘 包装:卷带(TR) 描述:IC REG LIN POS ADJ 300MA 8TDFN 集成电路(IC) 线性 + 开关稳压器

AD

亚德诺

封装/外壳:8-WDFN 裸露焊盘 包装:卷带(TR) 描述:IC REG LIN POS ADJ 300MA 8TDFN 集成电路(IC) 稳压器 - 线性

AD

亚德诺

KK Mini -2.50mm & 2.54mm Modular Interconnection System

文件:69.47 Kbytes Page:2 Pages

MOLEX

莫仕

ALUMINUM ELECTROLYTIC CAPACITORS

文件:77.19 Kbytes Page:2 Pages

NICHICON

尼吉康

2 MHz, Low-Input Bias Current Op Amps

文件:1.79185 Mbytes Page:50 Pages

MICROCHIP

微芯科技

TRANSIENT VOLTAGE SUPPRESSOR

文件:80.61 Kbytes Page:2 Pages

SSDI

MAX6471产品属性

  • 类型

    描述

  • VIN (max)(V):

    5.5

  • Rated ILOAD(mA):

    300

  • Preset VOUT(V):

    1.5

  • Polarity:

    Positive

  • # Regulators:

    1

  • VDROPOUT @Rated ILOAD (typ)(V):

    0.11

  • VOUT Acc.(±%):

    1.3

  • ICC (typ)(µA):

    82

  • ICC (max)(µA):

    136

  • Internal Pass Transistor:

    Yes

  • Shutdn/ Enable:

    No

  • Output Voltage Noise (typ)(µV RMS):

    150

  • Ref. Bypass:

    No

  • Low Batt./ Pwr. Fail Out:

    No

  • POK/ RST Output:

    Reset

  • POK/ RST Output Type:

    Push-Pull Active Low

  • POK/ Reset Thresh. (nom)(V):

    Vout-12.5%

  • Reset PW (min)(ms):

    2.5

  • Watchdog:

    No

  • Reverse Batt. Protect.:

    No

  • EV Kit Available:

    Yes

  • RoHS Available:

    Yes

  • Oper. Temp.(°C):

    -40 to +85

  • Package/ Pins:

    SOT23/6

  • Smallest Available Pckg. (max w/pins)(mm2):

    9.6

更新时间:2026-5-14 14:46:00
IC供应商 芯片型号 品牌 批号 封装 库存 备注 价格
ADI(亚德诺)
25+
N/A
18798
原装正品现货,原厂订货,可支持含税原型号开票。
Maxim
22+
8TDFNEP
9000
原厂渠道,现货配单
MAXIM
2021+
SOP-8
2500
原装现货 代理品牌
MAXIM
23+
DFN
8560
受权代理!全新原装现货特价热卖!
6/SOT23
23+
NA
15659
振宏微专业只做正品,假一罚百!
ADI(亚德诺)
25+
N/A
18746
样件支持,可原厂排单订货!
MAXIM
22+
TDFN-8
8200
原装现货库存.价格优势!!
MAXIM
24+
TDFN-8
4652
公司原厂原装现货假一罚十!特价出售!强势库存!
MAXIM/美信
25+
DFN
90000
全新原装现货
MAXIM/美信
24+
SSOPQFN
25050
原厂支持公司优势现货

MAX6471数据表相关新闻

  • MAX6504UKP015+T 恒温器 技术参数

    DS1721S+ MAX6504UKN015+T MAX1617AMEE+T MAX6608IUK+T

    2023-5-31
  • MAX6444US29L

    Active Low, Open Drain Voltage Supervisory Manual Reset 1 Input 监控电路 , Voltage Monitors Manual Reset 监控电路 , - 40 C 监控电路 , TPS3851 监控电路 , Voltage Supervisory 18 V 监控电路 , SMD/SMT 1 Input 监控电路

    2020-9-4
  • MAX6501UKP055+T贴片SOT-23-5温度传感器的介绍

    MAX6501UKP055+T 贴片SOT-23-5 温度传感器 的介绍

    2020-2-8
  • MAX6520-50ppm/ΣC,SOT23封装,三端,1.2V的电压基准

    描述 在MAX6520是最低功耗为1.2V,精度,三端电压基准,采用SOT23 - 3提供 包。理想的3V电池供电设备在权力保护是关键,MAX6520是低功耗替代现有的两个端并联基准。不同于二端抛出引用离电池电流,因此需要一个外部串联电阻,MAX6520具有70μA的最大供应电流(通常只有50μA的),是独立输入电压。此功能转化为最大效益在所有电池的电压。在MAX6520工作在电源电压低至为2.4V,初始精度为± 1%的SOT23封装。输出电压的温度系数一般只有25ppm的/℃,并保证要少低于50ppm /在SOT2​​3封装℃。

    2013-3-18
  • MAX6470-300mA的LDO线性稳压器内部微处理器复位电路

    概述 MAX6469 - MAX6484低压差线性稳压器一个完全集成的微处理器复位电路。每个预置输出电压+1.5 V的在100mV递增到3.3 V和提供高达300mA负载电流。这些器件仅消耗82μA电源电流。低电源电流,低电压差,和集成复位功能,使这些电池供电的便携式设备的理想设备。MAX6469 - MAX6484包括一个复位输出,用于指示当稳压器输出下降到低于标准微处理器供应公差(-7.5%或-12.5%额定输出电压)。这消除了对外部微处理器监控,同时确保供电电压和时钟振荡器稳定前启用处理器活动。推挽和漏极开路低有效复位输出,具有复位超时时间为2.5ms,20ms的时间150

    2013-1-17
  • MAX6430EIUR-T-模拟IC

    MAX6427- MAX6438单/双电池监控具有内部滞回。这些器件提供单(MAX6427/MAX6428/MAX6429,MAX6433/MAX6434/MAX6435)或双(MAX6430/MAX6431/MAX6432,MAX6436/MAX6437/MAX6438)低电池输出指标,它可以用来表示三种电池条件:电池是很好的(在正常的系统操作模式),电池电量不足(在低功耗的运作系统模式),或电池是空的(禁用系统)。这些设备用于监测单节锂离子电池的理想选择(李+)细胞或多节碱性/镍镉/镍氢电池电源。当电源电压低于指定低门槛,低电量输出断言。当电压高于指定的高门槛,lowbattery后140

    2012-12-30