Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120μA and 500μA of supply curre

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120μA and 500μA of supply curre

±15kV ESD保护、限摆率、低功耗、RS-485/RS-422收发器

MAX481E、MAX483E、MAX485E、MAX487E-MAX491E和MAX1487E是低功耗收发器，适用于恶劣环境中的RS-485和RS-422通信。每个驱动器输出和接收器输入都受到保护，可防止±15kV静电放电(ESD)冲击，不会发生闩锁。这些器件包含一个驱动器和一个接收器。MAX483E、MAX487E、MAX488E和MAX489E具有低摆率驱动器，可充分降低EMI并减少因电缆端接不当引起的反射，从而实现高达250kbps的无误差数据传输。MAX481E、MAX485E、MAX490E、MAX491E和MAX1487E的驱动器摆率不受限制，因此传输速率高达2.5Mbps。\n •针对容错应用：\nMAX3430：±80V故障保护、故障安全、1/4单位负载、+3.3V、RS-485收发器\nMAX3080-MAX3089：故障安全、高速(10Mbps)、限摆率、RS-485/RS-422收发器\n•针对空间受限的应用：\nMAX3460-MAX3464：+5V、故障安全、20Mbps、Profibus、RS-485/RS-422收发器\nMAX3362：+3.3V、高速、RS-485/RS-422收发器，采用SOT23封装\nMAX3280E-MAX3284E：±15kV ESD保护、52Mbps、+3V至+5.5V、SOT23、RS-485/RS-422真故障安全接;

RS-485/RS-422芯片

±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

文件：768.64 Kbytes Page：16 Pages

짹15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

General Description The MAX481E, MAX483E, MAX485E, MAX487E–MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro static discharge (ESD) shocks, without latchup. These

짹15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

General Description The MAX481E, MAX483E, MAX485E, MAX487E–MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro static discharge (ESD) shocks, without latchup. These

짹15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

General Description The MAX481E, MAX483E, MAX485E, MAX487E–MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro static discharge (ESD) shocks, without latchup. These

짹15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers

General Description The MAX481E, MAX483E, MAX485E, MAX487E–MAX491E, and MAX1487E are low-power transceivers for RS-485 and RS-422 communications in harsh environments. Each driver output and receiver input is protected against ±15kV electro static discharge (ESD) shocks, without latchup. These

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflecti

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflecti

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120μA and 500μA of supply curre

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description The MAX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120μA and 500μA of supply curre

封装/外壳：8-DIP（0.300"，7.62mm） 包装：管件 描述：IC TRANSCEIVER HALF 1/1 8DIP 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC TRANSCEIVER HALF 1/1 8SOIC 集成电路（IC） 驱动器，接收器，收发器

接口芯片

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages

Low Power RS-485/RS-422 Multipoint Transceiver

文件：140.24 Kbytes Page：10 Pages