5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH -15-kV ESD PROTECTION

文件：346.33 Kbytes Page：15 Pages

5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：377.33 Kbytes Page：38 Pages

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes Page：38 Pages

+5V供电、多通道RS-232驱动器/接收器

36V, 1A Octal Integrated Serial-Controlled Solenoid and Motor Driver

General Description The MAX22200 is an octal 36V serial-controlled solenoid driver. Each channel features a low impedance (200mΩ typ) push-pull output stage with sink-and-source driving capability and up to 1ARMS driving current. A serial interface (SPI) that also supports daisy-chain configu

36V, 1A Octal Integrated Serial-Controlled Solenoid and Motor Driver

General Description The MAX22200 is an octal 36V serial-controlled solenoid driver. Each channel features a low impedance (200mΩ typ) push-pull output stage with sink-and-source driving capability and up to 1ARMS driving current. A serial interface (SPI) that also supports daisy-chain configu

65V, 7.6A High Current Single H-Bridge with Integrated Current-Sense

General Description The MAX22205 integrates a high current 65V, 7.6AMAX H-Bridge to drive one Brushed DC motor or one half Stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heat. The typical total RON (high-side + low-side) is 0.15Ω. The H

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

36V, 3.8A Stepper Motor Driver with Integrated Current Sense and 128 Microstep Indexer

General Description The MAX22210 is a 2-phase stepper motor driver. It integrates two 36V, 3.8AMAX H-bridges. The H-bridge FETs have very low impedance that result in high driving efficiency and minimal heat generated. The typical total RON (high side + low side) is 0.25Ω. The MAX22210 integ

36V, 3.8A Stepper Motor Driver with Integrated Current Sense and 128 Microstep Indexer

General Description The MAX22210 is a 2-phase stepper motor driver. It integrates two 36V, 3.8AMAX H-bridges. The H-bridge FETs have very low impedance that result in high driving efficiency and minimal heat generated. The typical total RON (high side + low side) is 0.25Ω. The MAX22210 integ

36V, 3.8A Stepper Motor Driver with Integrated Current Sense and 128 Microstep Indexer

General Description The MAX22210 is a 2-phase stepper motor driver. It integrates two 36V, 3.8AMAX H-bridges. The H-bridge FETs have very low impedance that result in high driving efficiency and minimal heat generated. The typical total RON (high side + low side) is 0.25Ω. The MAX22210 integ

36V, 3.8A Two H-Bridge for Dual Brushed or Single Stepper Motor Drive

General Description The MAX22211 is a dual 36V, 3.8AMAX H-bridge. It can be used to drive two brushed DC motors or a single stepper motor. The H-bridge FETs have very low impedance resulting in high driving efficiency and low heat generation. The typical total RON (high-side + low-side) is 0.

36V, 3.8A Two H-Bridge for Dual Brushed or Single Stepper Motor Drive

General Description The MAX22211 is a dual 36V, 3.8AMAX H-bridge. It can be used to drive two brushed DC motors or a single stepper motor. The H-bridge FETs have very low impedance resulting in high driving efficiency and low heat generation. The typical total RON (high-side + low-side) is 0.

36V, 3.8A Two H-Bridge for Dual Brushed or Single Stepper Motor Drive

General Description The MAX22211 is a dual 36V, 3.8AMAX H-bridge. It can be used to drive two brushed DC motors or a single stepper motor. The H-bridge FETs have very low impedance resulting in high driving efficiency and low heat generation. The typical total RON (high-side + low-side) is 0.

36V, 7.6A High Current Single H-Bridge with Integrated Current Sense

General Description The MAX22212 integrates a high current 36V, 7.6AMAXH-Bridge to drive one Brushed DC motor or one half ofa stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heatgeneration. The typical total RON (high-side + low-side) is 0

36V, 7.6A High Current Single H-Bridge with Integrated Current Sense

General Description The MAX22212 integrates a high current 36V, 7.6AMAXH-Bridge to drive one Brushed DC motor or one half ofa stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heatgeneration. The typical total RON (high-side + low-side) is 0

36V, 7.6A High Current Single H-Bridge with Integrated Current Sense

General Description The MAX22212 integrates a high current 36V, 7.6AMAXH-Bridge to drive one Brushed DC motor or one half ofa stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heatgeneration. The typical total RON (high-side + low-side) is 0

36V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high

36V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high

36V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high

36V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22213 provides four individually controllable 36V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance resulting in high

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

Quad Smart Serial-Controlled Solenoid and Motor Driver with Advanced Diagnostic

General Description The MAX22216/MAX22217 integrate four programmable 36V half-bridges. It is primarily intended to drive inductive loads such as on-off solenoid valves, DC motors, proportional valves, bi-stable valves, relays, etc. The MAX22216 is capable of up to 3.2AFS per half-bridge, whe

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

Configurable for High-Side/Low-Side Solenoid Driver

文件：888.06 Kbytes Page：12 Pages

功能：螺线管控制 包装：盒 描述：EVKIT FOR EIGHT HALF-BRIDGE SERI 开发板，套件，编程器 评估和演示板及套件

Configurable for High-Side/Low-Side Solenoid Driver

文件：888.06 Kbytes Page：12 Pages

Evaluation Kit

文件：1.04145 Mbytes Page：11 Pages

集成电流检测功能的36V、3.5A有刷电机驱动器

封装/外壳：12-WFDFN 裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：36V BRUSHED DC MOTOR DRIVER WITH 集成电路（IC） 电机驱动器，控制器

Configurable for External PWM or Adjustable On-Board PWM Input

文件：1.04145 Mbytes Page：11 Pages

Evaluation Kit

文件：1.04145 Mbytes Page：11 Pages

Configurable for External PWM or Adjustable On-Board PWM Input

文件：1.04145 Mbytes Page：11 Pages

65V, 3.8A Dual Brushed or Single Stepper Motor Driver with Integrated Current Sense

文件：411.44 Kbytes Page：23 Pages

具有集成电流检测功能的65V、3.8A双通道有刷或单通道步进电机驱动器

65V, 3.8A Dual Brushed or Single Stepper Motor Driver with Integrated Current Sense

文件：411.44 Kbytes Page：23 Pages

Easy Evaluation of the MAX22203

文件：1.06678 Mbytes Page：10 Pages

Easy Evaluation of the MAX22203

文件：1.06678 Mbytes Page：10 Pages

All Critical Peripheral Components Included

文件：847.27 Kbytes Page：10 Pages

All Critical Peripheral Components Included

文件：847.27 Kbytes Page：10 Pages

Reinforced, Fast, Low-Power, Two-Channel Digital Isolators

文件：972.81 Kbytes Page：22 Pages

Broad Range of Data Transfer Rates (from DC to 200Mbps)

文件：1.21358 Mbytes Page：11 Pages