1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

27W SWITCHING REGULATOR FOR AUTOMOTIVE APPLICATION

DESCRIPTION The GS-R218 is a switching voltage regulator that can deliver an output current of 1,5 A at 18 V when supplied by a car battery. The regulator uses a cigar lighter case with a coiled cord and it is protected against overloads and short circuits at the output (latching overload protec

Thyristors(Silicon Controlled Rectifiers)

. . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. • Glass-Passivated Junctions • Blocking Voltage to 800 Volts • TO-220 Construction —

Silicon PNP Transistor Audio Power Output

Description: The NTE218 is ideal for use as a driver, switch and medium–power amplifier applications. This device features: Features: • Low Saturation Voltage – 0.6VCE(sat) @ IC = 1A • High Gain Characteristics – hFE @ IC = 250mA: 30–100 • Excellent Safe Area Limits

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

Operational Amplifiers

文件：597.13 Kbytes Page：18 Pages