5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

+5V、RS-232收发器，0.1µF外部电容

\n\n • Saves Board Space•Integrated Charge Pump Circuitry\n• Eliminates the Need for a Bipolar ±12V Supply•Enables Single Supply Operation From Either +5V or 9V to +12V\n\n\n•Integrated 0.1μF Capacitors (MAX203, MAX205)•24 pin SSOP Package Saves Up to 40% Versus SO Package\n\n\n•Saves Power for Longe;

Transceivers External Capacitors

文件：4.81474 Mbytes Page：20 Pages

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes Page：38 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

低导通电阻、双向过压保护，带电流检测

MAX20305/MAX20306为过压保护器，为高价值消费电路提供高达+28VDC的正电压故障保护。内部箝位电路也为设备提供高达±100V的浪涌保护。过流标识可用于关断设备。\n\n器件具有反向偏压阻塞能力。与其它过压保护器不同，器件被禁止时，施加到OUT的电压不反馈到VBUS侧。器件也具有OTG使能(OTG_EN)，在OUT高于输出启动电压时，允许OUT电压为VBUS供电。\n\n这些过压保护器件具有高电压、低导通电阻(23mΩ，典型值)内部FET，有效降低器件上的压降。当输入电压高于过压门限时，内部FET断开，以防止损坏被保护电路。这些器件也具有热关断保护，防止过载条件。\n\n利用可选 • 保护便携式设备\n• 6A连续输出电流能力\n• 灵活的过压保护 \n• OTG支持OUT为VBUS供电 \n• 附加保护特性提高系统可靠性 \n• 软启动电路大大降低了输入浪涌电流\n• 热关断保护\n• 电源就绪(POK) 4V稳压输出(MAX20306)\n• 节省空间\n• 30焊球(2.65mm x 2.23mm);

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. With a 650MHz to 1250

Universal 3.5mmØ Accessory Management IC

Features ●●Allows Wide Range of Applications by Supporting Universal 3.5mm Jack Types •Auto-Configuration for CTIA and OMTP Headsets •Supports MEMS Microphone •50mΩ Ground Switch ●●Enables Long Utilization of Accessories by Supplying Power Through 3.5mm Jack •Powered Accessory/Headset Detect

Universal 3.5mmØ Accessory Management IC

Features ●●Allows Wide Range of Applications by Supporting Universal 3.5mm Jack Types •Auto-Configuration for CTIA and OMTP Headsets •Supports MEMS Microphone •50mΩ Ground Switch ●●Enables Long Utilization of Accessories by Supplying Power Through 3.5mm Jack •Powered Accessory/Headset Detect

Universal 3.5mmØ Accessory Management IC

Features ●●Allows Wide Range of Applications by Supporting Universal 3.5mm Jack Types •Auto-Configuration for CTIA and OMTP Headsets •Supports MEMS Microphone •50mΩ Ground Switch ●●Enables Long Utilization of Accessories by Supplying Power Through 3.5mm Jack •Powered Accessory/Headset Detect

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. With a 650MHz to 1250

High-Linearity, 650MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch

General Description The MAX2032 high-linearity passive upconverter or downconverter mixer is designed to provide +33dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support a multitude of base-station applications. With a 650MHz to 1250MHz LO frequency range

High-Linearity, 650MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch

General Description The MAX2032 high-linearity passive upconverter or downconverter mixer is designed to provide +33dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support a multitude of base-station applications. With a 650MHz to 1250MHz LO frequency range

High-Linearity, 650MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch

General Description The MAX2032 high-linearity passive upconverter or downconverter mixer is designed to provide +33dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support a multitude of base-station applications. With a 650MHz to 1250MHz LO frequency range

Quad-Channel, Ultra-Low-Noise Amplifier with Digitally Programmable Input Impedance

General Description The MAX2034 four-channel, low-power, ultra-low-noise preamplifier is designed for ultrasound and medical instrumentation applications. Each low-noise amplifier has a single-ended input, differential output, a highly accurate 19dB fixed gain, and a wide -3dB bandwidth of 70MHz.

Quad-Channel, Ultra-Low-Noise Amplifier with Digitally Programmable Input Impedance

General Description The MAX2034 four-channel, low-power, ultra-low-noise preamplifier is designed for ultrasound and medical instrumentation applications. Each low-noise amplifier has a single-ended input, differential output, a highly accurate 19dB fixed gain, and a wide -3dB bandwidth of 70MHz.

Quad-Channel, Ultra-Low-Noise Amplifier with Digitally Programmable Input Impedance

General Description The MAX2034 four-channel, low-power, ultra-low-noise preamplifier is designed for ultrasound and medical instrumentation applications. Each low-noise amplifier has a single-ended input, differential output, a highly accurate 19dB fixed gain, and a wide -3dB bandwidth of 70MHz.

Quad-Channel, Ultra-Low-Noise Amplifier with Digitally Programmable Input Impedance

General Description The MAX2034 four-channel, low-power, ultra-low-noise preamplifier is designed for ultrasound and medical instrumentation applications. Each low-noise amplifier has a single-ended input, differential output, a highly accurate 19dB fixed gain, and a wide -3dB bandwidth of 70MHz.

Quad-Channel, Ultra-Low-Noise Amplifier with Digitally Programmable Input Impedance

General Description The MAX2034 four-channel, low-power, ultra-low-noise preamplifier is designed for ultrasound and medical instrumentation applications. Each low-noise amplifier has a single-ended input, differential output, a highly accurate 19dB fixed gain, and a wide -3dB bandwidth of 70MHz.

Ultrasound Variable-Gain Amplifier

General Description The MAX2035 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typically

Wearable Power-Management Solution

General Description The MAX20356 is a highly integrated and programmable power-management solution designed for ultra-low-power wearable applications. It is optimized for size and efficiency to enhance the value of the end product by extending battery life and shrinking the overall solution size.

Wearable Power-Management Solution

General Description The MAX20356 is a highly integrated and programmable power-management solution designed for ultra-low-power wearable applications. It is optimized for size and efficiency to enhance the value of the end product by extending battery life and shrinking the overall solution size.

Wearable Power-Management Solution

General Description The MAX20356 is a highly integrated and programmable power-management solution designed for ultra-low-power wearable applications. It is optimized for size and efficiency to enhance the value of the end product by extending battery life and shrinking the overall solution size.

Ultrasound Variable-Gain Amplifier

General Description The MAX2035 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typically

Ultrasound Variable-Gain Amplifier

General Description The MAX2035 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typically

Ultrasound Variable-Gain Amplifier

General Description The MAX2035 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typically

Ultrasound Variable-Gain Amplifier

General Description The MAX2035 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typically

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2036 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

PPG Optimized Buck-Boost Converter with 500mA Output Current and Ultra-Fast DVS Capability

FEATURES Extend System Runtime Ultra-fast dynamic voltage scaling with directAFE control Low, 2.5A (typical) quiescent current 96% peak efficiency Low, Continuous Noise Profile No post-filtering LDO required in PPG systems No discontinuities across operating voltagerange Adapt

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2036 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2036 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

Ultrasound Variable-Gain Amplifier

General Description The MAX2037 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typicall

Ultrasound Variable-Gain Amplifier

General Description The MAX2037 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typicall

Ultrasound Variable-Gain Amplifier

General Description The MAX2037 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typicall

Ultrasound Variable-Gain Amplifier

General Description The MAX2037 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typicall

Ultrasound Variable-Gain Amplifier

General Description The MAX2037 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs and a total gain range of typicall

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2038 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2038 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

Ultrasound VGA Integrated with CW Octal Mixer

General Description The MAX2038 8-channel variable-gain amplifier (VGA) and programmable octal mixer array is designed for high linearity, high dynamic range, and low noise performance targeting ultrasound imaging and Doppler applications. Each amplifier features differential inputs and outputs a

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2039 high-linearity passive upconverter or downconverter mixer is designed to provide 7.3dB NF and a 7.1dB conversion loss for an RF frequency range of 1700MHz to 2200MHz to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications. Features

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2039 high-linearity passive upconverter or downconverter mixer is designed to provide 7.3dB NF and a 7.1dB conversion loss for an RF frequency range of 1700MHz to 2200MHz to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications. Features

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2039 high-linearity passive upconverter or downconverter mixer is designed to provide 7.3dB NF and a 7.1dB conversion loss for an RF frequency range of 1700MHz to 2200MHz to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications. Features

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2039 high-linearity passive upconverter or downconverter mixer is designed to provide 7.3dB NF and a 7.1dB conversion loss for an RF frequency range of 1700MHz to 2200MHz to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications. Features

High-Linearity, 1700MHz to 2200MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2039 high-linearity passive upconverter or downconverter mixer is designed to provide 7.3dB NF and a 7.1dB conversion loss for an RF frequency range of 1700MHz to 2200MHz to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications. Features

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl