5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

+5V、RS-232收发器，0.1µF外部电容

MAX200-MAX209、MAX211和MAX213是一个RS-232和V.28收发器系列，集成了电荷泵电路，通过+5V单电源供电。\n\n 根据EIA/TIA-232E规范加载时，这些驱动器在超过120kbps的数据速率下保持±5V EIA/TIA-232E输出信号电平。\n\n MAX211和MAX213采用28引脚宽体小型(SO)封装和28引脚紧缩小型(SSOP)封装，后者仅占SO面积的40%。MAX207采用24引脚SO和24引脚SSOP封装。MAX203和MAX205不使用外部元件，推荐用于电路板空间有限的应用。\n\n   • 节省电路板空间•集成电荷泵电路\n• 支持单电源供电：+5V或9V至+12V\n• 集成0.1μF电容（MAX203、MAX205）\n•省电，可延长电池运行时间\n• 提供75µW响铃指示监控，带有两个有源接收器(MAX213);

具有 +/-9V 输出和 +/-15kV ESD 保护的 5V 双通道 120kbps RS-232 线路驱动器/接收器

The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous comm • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards\n• ESD Protection for RS-232 Bus Pins: ±15-kV Human-Body Model\n• Operates at 5-V VCC Supply\n• Operates Up to 120 kbit/s\n• Two Drivers and Two Receivers\n• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II;

Transceivers External Capacitors

文件：4.81474 Mbytes Page：20 Pages

5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH ESD PROTECTION

文件：746.03 Kbytes Page：20 Pages

5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH -15KV ESD PROTECTION

文件：321.08 Kbytes Page：14 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes Page：38 Pages

5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH 짹15-kV ESD PROTECTION

文件：382.59 Kbytes Page：14 Pages

High-Dynamic-Range, Direct Up-/Downconversion 750MHz to 1200MHz Quadrature Mod/Demod

General Description The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 650MHz to 1200MHz GSM/EDGE, cdma2000®, WCDMA, and iDEN® base-station applications. Di

1700MHz to 2200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2059 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 56dB of total gain range and typical output IP3 and output P1dB levels of +31.8dBm and +18.4dBm, respectively. The device is ideal for a variety of applications, including single and multi

700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2058 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 62dB of total gain range and typical output IP3 and output P1dB levels of +32.3dBm and +19dBm, respectively. The device is ideal for a variety of applications, including RFID handheld and

High-Dynamic-Range, Direct Up-/Downconversion 750MHz to 1200MHz Quadrature Mod/Demod

General Description The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 650MHz to 1200MHz GSM/EDGE, cdma2000®, WCDMA, and iDEN® base-station applications. Di

High-Dynamic-Range, Direct Up-/Downconversion 750MHz to 1200MHz Quadrature Mod/Demod

General Description The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 650MHz to 1200MHz GSM/EDGE, cdma2000®, WCDMA, and iDEN® base-station applications. Di

High-Dynamic-Range, Direct Up-/Downconversion 750MHz to 1200MHz Quadrature Mod/Demod

General Description The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 650MHz to 1200MHz GSM/EDGE, cdma2000®, WCDMA, and iDEN® base-station applications. Di

700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2058 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 62dB of total gain range and typical output IP3 and output P1dB levels of +32.3dBm and +19dBm, respectively. The device is ideal for a variety of applications, including RFID handheld and

High-Dynamic-Range, Direct Upconversion 1500MHz to 2500MHz Quadrature Modulator

General Description The MAX2022 low-noise, high-linearity, direct upconversion quadrature modulator is designed for single and multicarrier 1800MHz to 2200MHz UMTS/WCDMA, cdma2000®, and DCS/PCS base-station applications. Direct upconversion architectures are advantageous since they significantly

1700MHz to 2200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2059 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 56dB of total gain range and typical output IP3 and output P1dB levels of +31.8dBm and +18.4dBm, respectively. The device is ideal for a variety of applications, including single and multi

高动态范围、直接上/下变频、1500MHz至3000MHz正交调制器/解调器

MAX2022低噪声、高线性度、直接变换正交调制器/解调器，设计用于单路和多路载波的1500MHz至3000MHz UMTS/WCDMA、LTE/TD-LTE、cdma2000®和DCS/PCS基站应用。与传统的基于IF的双变频系统相比，直接变换结构具有很好的特性，可以显著地降低发射机或接收机成本、元件数量以及功耗。\n\n 除具有优异的线性度和噪声性能之外，MAX2022还具有非常高的集成度。该器件包括两个用于调制或解调同相正交信号的匹配无源混频器、三个LO混频放大驱动器以及一个LO正交分频器。片内集成不平衡变压器，支持单端RF与LO连接。此外，器件还具有基带输入匹配特性，可直接与 • 1500MHz至3000MHz RF频率范围\n• 1500MHz至3000MHz LO频率范围\n• 功率可调：通过外部电流设置电阻选择工作在低功耗/低性能模式\n• 36引脚、6mm x 6mm TQFN封装，在小尺寸封装中提供较高隔离度 \n• 调制器工作(2140MHz)：\n• 符合四载频WCDMA 65dBc ACLR\n• 23.3dBm典型OIP3\n• 51.5dBm典型OIP2\n• 45.7dBc典型边带抑制\n• -40dBm典型LO泄漏\n• -173.2dBm/Hz典型输出噪声，无需RF输出滤波器\n• 宽带基带输入\n• 具有DC耦合输入，可直接与发射DAC接;

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500

1700MHz to 2200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2059 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 56dB of total gain range and typical output IP3 and output P1dB levels of +31.8dBm and +18.4dBm, respectively. The device is ideal for a variety of applications, including single and multi

700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2058 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 62dB of total gain range and typical output IP3 and output P1dB levels of +32.3dBm and +19dBm, respectively. The device is ideal for a variety of applications, including RFID handheld and

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2500MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500MH

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2500MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500MH

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2500MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500MH

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2500MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500MH

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500

High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod

General Description The MAX2023 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for single and multicarrier 1500MHz to 2500MHz DCS 1800/PCS 1900 EDGE, cdma2000®, WCDMA/LTE/TD-LTE, and PHS/PAS base-station applications. Features ♦ 1500

IF Digitally Controlled Variable-Gain Amplifier

General Description The MAX2027 high-performance, digitally controlled variable-gain amplifier is designed for use from 50MHz to 400MHz. Features ♦ 50MHz to 400MHz Frequency Range ♦ Variable Gain: -8dB to +15dB ♦ Output IP3: 35dBm (at All Gain Settings) ♦ Noise Figure: 4.7dB at Maximum Gain

IF Digitally Controlled Variable-Gain Amplifier

General Description The MAX2027 high-performance, digitally controlled variable-gain amplifier is designed for use from 50MHz to 400MHz. Features ♦ 50MHz to 400MHz Frequency Range ♦ Variable Gain: -8dB to +15dB ♦ Output IP3: 35dBm (at All Gain Settings) ♦ Noise Figure: 4.7dB at Maximum Gain

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. Features ♦ 8

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. Features ♦ 8

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. Features ♦ 8

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. Features ♦ 8

High-Linearity, 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch

General Description The MAX2029 high-linearity passive upconverter or downconverter mixer is designed to provide +36.5dBm IIP3, 6.7dB NF, and 6.5dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. Features ♦ 8

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15,-15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15,-15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa