High-Dynamic-Range, Direct Upconversion 1500MHz to 2500MHz Quadrature Modulator

General Description The MAX2022 low-noise, high-linearity, direct upconversion quadrature modulator is designed for single and multicarrier 1800MHz to 2200MHz UMTS/WCDMA, cdma2000®, and DCS/PCS base-station applications. Direct upconversion architectures are advantageous since they significantly

1700MHz to 2200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2059 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 56dB of total gain range and typical output IP3 and output P1dB levels of +31.8dBm and +18.4dBm, respectively. The device is ideal for a variety of applications, including single and multi

700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

General Description The MAX2058 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 62dB of total gain range and typical output IP3 and output P1dB levels of +32.3dBm and +19dBm, respectively. The device is ideal for a variety of applications, including RFID handheld and

高动态范围、直接上/下变频、1500MHz至3000MHz正交调制器/解调器

MAX2022低噪声、高线性度、直接变换正交调制器/解调器，设计用于单路和多路载波的1500MHz至3000MHz UMTS/WCDMA、LTE/TD-LTE、cdma2000®和DCS/PCS基站应用。与传统的基于IF的双变频系统相比，直接变换结构具有很好的特性，可以显著地降低发射机或接收机成本、元件数量以及功耗。\n\n 除具有优异的线性度和噪声性能之外，MAX2022还具有非常高的集成度。该器件包括两个用于调制或解调同相正交信号的匹配无源混频器、三个LO混频放大驱动器以及一个LO正交分频器。片内集成不平衡变压器，支持单端RF与LO连接。此外，器件还具有基带输入匹配特性，可直接与 • 1500MHz至3000MHz RF频率范围\n• 1500MHz至3000MHz LO频率范围\n• 功率可调：通过外部电流设置电阻选择工作在低功耗/低性能模式\n• 36引脚、6mm x 6mm TQFN封装，在小尺寸封装中提供较高隔离度 \n• 调制器工作(2140MHz)：\n• 符合四载频WCDMA 65dBc ACLR\n• 23.3dBm典型OIP3\n• 51.5dBm典型OIP2\n• 45.7dBc典型边带抑制\n• -40dBm典型LO泄漏\n• -173.2dBm/Hz典型输出噪声，无需RF输出滤波器\n• 宽带基带输入\n• 具有DC耦合输入，可直接与发射DAC接;

Evaluation Kit

文件：224.66 Kbytes Page：8 Pages

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：1.25562 Mbytes Page：26 Pages

Evaluation Kit

文件：224.66 Kbytes Page：8 Pages

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：3.02504 Mbytes Page：20 Pages

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：1.25562 Mbytes Page：26 Pages

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：3.02504 Mbytes Page：20 Pages

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：1.25562 Mbytes Page：26 Pages

封装/外壳：36-WFQFN 裸露焊盘 功能：调制器/解调器 包装：卷带（TR） 描述：IC MOD 1500MHZ TO 2500MHZ 36TQFN RF/IF，射频/中频和 RFID RF 其它 IC 和模块

封装/外壳：36-WFQFN 裸露焊盘 功能：调制器/解调器 包装：管件 描述：IC QUADRATURE MODULATOR 36QFN RF/IF，射频/中频和 RFID RF 其它 IC 和模块

High-Dynamic-Range, Direct Up/ Downconversion 1500MHz to 3000MHz Quadrature Modulator/Demodulator

文件：1.25562 Mbytes Page：26 Pages

Evaluation Kit

文件：224.66 Kbytes Page：8 Pages

Integrated Circuit 8-Digit/Segment Fluorescent Display Driver

Description: The NTE2021 and NTE2022 consist of eight NPN Darlington output stages and the associated common–emitter input stages in an 18–Lead DIP type package. These devices are designed to interface between low–level digital logic and vacuum fluorescent displays. They are capable of driving

CK00 100/133 MHz spread spectrum differential system clock generator

DESCRIPTION The PCK2022R is a clock synthesizer/driver for a Pentium III™ and other similar processors The PCK2022R has eight differential pair CPU current source outputs, one 33/66 MHz output which is configurable on power-up, two 48 MHz clocks which can be disabled on power-up, and one 3.3 V r

CK00 100/133 MHz spread spectrum differential system clock generator

DESCRIPTION The PCK2022R is a clock synthesizer/driver for a Pentium III™ and other similar processors The PCK2022R has eight differential pair CPU current source outputs, one 33/66 MHz output which is configurable on power-up, two 48 MHz clocks which can be disabled on power-up, and one 3.3 V r

Tape formatting and error correction for the DCC system

GENERAL DESCRIPTION Performing the tape formatting and error correction functions for DCC applications, the SAA2022 can be used in conjunction with the PASC (SAA2002/SAA2012), tape equalization (SAA2032), read amplifier (TDA1317 or TDA1318) and write amplifier (TDA1316 or TDA1319) circuits to imp

Tape formatting and error correction for the DCC system

GENERAL DESCRIPTION Performing the tape formatting and error correction functions for DCC applications, the SAA2022 can be used in conjunction with the PASC (SAA2002/SAA2012), tape equalization (SAA2032), read amplifier (TDA1317 or TDA1318) and write amplifier (TDA1316 or TDA1319) circuits to imp