Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Jumper-Selectable Configuration

文件：205.92 Kbytes Page：8 Pages

6通道、多量程、5V、12位DAS，带有12位总线接口和故障保护

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

Low-Input-Voltage, 300mA LDO Regulators with RESETin SOT and TDFN

General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V ra

Low-Input-Voltage, 300mA LDO Regulators with RESETin SOT and TDFN

General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V ra

Low-Input-Voltage, 300mA LDO Regulators with RESETin SOT and TDFN

General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V ra

Tracking/Sequencing Triple/Quintuple Power-Supply Controllers

General Description The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC supply (such as a

Tracking/Sequencing Triple/Quintuple Power-Supply Controllers

General Description The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC supply (such as a

Tracking/Sequencing Triple/Quintuple Power-Supply Controllers

General Description The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC supply (such as a

Tracking/Sequencing Triple/Quintuple Power-Supply Controllers

General Description The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC supply (such as a

Low-Cost Voltage-Mode PWM Step-Down Controllers

General Description The MAX1966/MAX1967 are voltage-mode pulse-width-modulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and synchronous rectifier and require no external Schottky pow

Low-Cost Voltage-Mode PWM Step-Down Controllers

General Description The MAX1966/MAX1967 are voltage-mode pulse-width-modulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and synchronous rectifier and require no external Schottky pow

Low-Cost Voltage-Mode PWM Step-Down Controllers

General Description The MAX1966/MAX1967 are voltage-mode pulse-width-modulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and synchronous rectifier and require no external Schottky pow

Low-Cost Voltage-Mode PWM Step-Down Controllers

General Description The MAX1966/MAX1967 are voltage-mode pulse-width-modulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and synchronous rectifier and require no external Schottky pow

Power Drivers for Peltier TEC Modules

General Description The MAX1968/MAX1969 are highly integrated and cost effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components whi

Power Drivers for Peltier TEC Modules

General Description The MAX1968/MAX1969 are highly integrated and cost effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components whi

Power Drivers for Peltier TEC Modules

General Description The MAX1968/MAX1969 are highly integrated and cost effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components whi

Power Drivers for Peltier TEC Modules

General Description The MAX1968/MAX1969 are highly integrated and cost effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components whi

Power Drivers for Peltier TEC Modules

General Description The MAX1968/MAX1969 are highly integrated and cost effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components whi

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single %V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

封装/外壳：20-SSOP（0.154"，3.90mm 宽） 功能：降压 包装：管件 描述：IC REG CTRLR BUCK 20QSOP 集成电路（IC） PMIC - 稳压器 - DC DC 开关式控制器

封装/外壳：20-SSOP（0.154"，3.90mm 宽） 功能：降压 包装：管件 描述：IC REG CTRLR BUCK 20QSOP 集成电路（IC） DC-DC 开关控制器

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

文件：321.58 Kbytes Page：29 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：313.45 Kbytes Page：12 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESETin SOT and TDFN

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：313.45 Kbytes Page：12 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：364.32 Kbytes Page：15 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：225.93 Kbytes Page：10 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：225.93 Kbytes Page：10 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：364.32 Kbytes Page：15 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：225.93 Kbytes Page：10 Pages

Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN

文件：364.32 Kbytes Page：15 Pages