OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)

DESCRIPTION The 74HCT244 is an advanced high-speed CMOS OCTAL BUS BUFFER (3-STATE) fabricated with silicon gate C2MOS technology. G control input governs four BUS BUFFERs. All inputs are equipped with protection circuits against static discharge and transient excess voltage. ■ HIGH SPEED: tP

OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)

DESCRIPTION The 74HCT244 is an advanced high-speed CMOS OCTAL BUS BUFFER (3-STATE) fabricated with silicon gate C2MOS technology. G control input governs four BUS BUFFERs. All inputs are equipped with protection circuits against static discharge and transient excess voltage. ■ HIGH SPEED: tP

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 包装：卷带（TR） 描述：IC BUFFER NON-INVERT 5.5V 20SOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT244 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICC category: MSI

Octal buffer/line driver; 3-state

1. General description The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs

Octal buffer/line driver; 3-state

文件：145.15 Kbytes Page：18 Pages

Octal buffer/line driver; 3-state Rev. 4 ??24 September 2012

文件：145.15 Kbytes Page：18 Pages

Octal buffer/line driver; 3-state

文件：127.32 Kbytes Page：22 Pages