OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)

DESCRIPTION The M54/74HC240, HC241 and HC244 are high speed CMOS OCTAL BUS BUFFERs fabricated in silicon gate C2MOS technology. ■ HIGH SPEED tPD = 10 ns (TYP.) at VCC = 5V ■ LOW POWER DISSIPATION ICC = 4 µA (MAX.) at TA = 25 °C ■ HIGH NOISE IMMUNITY VNIH = VINL = 28 VCC (MIN.) ■ OUTPUT DRI

Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT241 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT241 are octal non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs a

Octal buffer/line driver; 3-state

1. General description The 74HC241; 74HCT241 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on 1OE or LOW on 2OE caus

High Speed CMOS Logic

Features Output Drive Capability: 15 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with 74LS241 Lower power alternative to Bipolar or BiCMOS logic

Octal buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT241 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT241 are octal non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs a

High Speed CMOS Logic

文件：398.82 Kbytes Page：6 Pages