6A Low Noise, High Performance Buck-Boost DC/DC Converter

FEATURES - Single Inductor Buck-Boost Architecture - Low Noise Buck-Boost Architecture - Wide VIN Range 1.8V to 5.5V - Adjustable VOUT Range 1.8V to 5.5V - 5A of Continuous Output Current with VIN > VOUT - Up to 95 Efficiency - Selectable Internal 2.2MHz Fixed Frequency Adjustable and Sync

15V, 1.5A Synchronous Buck-Boost DC/DC Converter

文件：508.68 Kbytes Page：32 Pages

15V、1.5A 同步降压-升压型 DC/DC 转换器

15V, 1.5A Synchronous Buck-Boost DC/DC Converter

文件：508.68 Kbytes Page：32 Pages

封装/外壳：14-WFDFN 裸露焊盘 功能：升压/降压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG BCK BST ADJ 1.5A 14DFN 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：14-WFDFN 裸露焊盘 功能：升压/降压 包装：管件 描述：IC REG BCK BST ADJ 1.5A 14DFN 集成电路（IC） DC DC 开关稳压器

15V, 1.5A Synchronous Buck-Boost DC/DC Converter

文件：532.17 Kbytes Page：6 Pages

MicroPower??Regulated Charge Pump

General Description The AAT3111 ChargePump™ is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, the AAT3111 can deliver up to 150mA to the voltage regulated output. The AAT3111 feature

NPN Epitaxial Silicon Transistor

Switching Application (Bias Resistor Built In) • Switching circuit, Inverter, Interface circuit, Driver Circuit • Built in bias Resistor (R=22KΩ) • Complement to FJV4111R

Vertical Driver LSI for Video Camera CCD Area Image Sensor

Overview The MN3111H is a vertical driver LSI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction with such external components as four booster capacitors, six voltage stabilization capacitors, eight Schottky barrier diodes, and two Z

Vertical Driver LSI for Video Camera CCD Area Image Sensor

Overview The MN3111H is a vertical driver LSI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction with such external components as four booster capacitors, six voltage stabilization capacitors, eight Schottky barrier diodes, and two Z

FET BIAS CONTROLLER WITH POLARISATION SWITCH AND TONE DETECTION

DEVICE DESCRIPTION The ZNBG series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR cellular telephones etc. with a minimum of external components. FEATURES • Provides bias for GaAs and HEMT FETs • Drives up to three