2 port MIPI DSI/CSI to HDMI 1.4

The LT9611 MIPI® DSI/CSI to HDMI1.4 bridge features a dual-port MIPI® D-PHY receiver front-end configuration with 4 data lanes per port operating at 2Gbps per data lane and a maximum input bandwidth of 16Gbps.\n\nThe bridge provides a HDMI data output with optional S/PDIF or 8-channel I2S serial aud • Dual-Port  MIPI® DSI/CSI Receiver\n• HDMI1.4 Transmitter\n• Miscellaneous;

2-Port MIPI to HDMI1.4 Converter

文件：1.159372 Mbytes Page：19 Pages

Dual-Port MIPI DPHY/CPHY to HD-DVI2.1 Converter

LT9611GX is a high performance Dual-Port MIPI DPHY/CPHY to HD-DVI2.1 converter.For MIPI DPHY input, LT9611GX can be configured as 2 Ports and 1/2/4 lanes per port. Up to 12dB equalization makes it suitable for long distance application and the maximum bandwidth is up to 36Gbps.For MIPI CPHY input, L • Dual-Port MIPI DSI/CSI Receiver\n• Digital Audio Input\n• HD-DVI2.0 Transmitter\n• Miscellaneous;

Dual-Port MIPI DSI/CSI to HDMI2.0 with MIPI Input Switch and Audio

The LT9611UX is a high performance MIPI DSI/CSI to HDMI2.0 converter for STB, DVD applications.\n\nThe MIPI DSI/CSI input features configurable single-port or dual-port with 1 high-speed clock lane, and 1~4 high-speed data lanes operating at maximum 2Gbps/lane, which can support a total bandwidth of • Single/Dual-Port MIPI DSI/CSI Receiver\n• Digital Audio Input\n• HDMI2.0 Transmitter\n• Miscellaneous;

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

PWM POWER MOS CONTROLLER

DESCRIPTION The L9610C/11C is a monolithic integrated circuit working in PWM mode as controller of an external powerMOS transistor in High Side Driver configuration. Features of the device include controlled slope of the leading and trailing edge of the gate driving voltage,linear current limiti

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER

DESCRIPTION The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. The PS9611 is in a plastic DIP (Dual I

FOUR-CHANNEL PCM CODEC

文件：161.86 Kbytes Page：28 Pages