42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/1.2A Switch

DESCRIPTION The LT®8301 is a micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Intern

2.8VIN to 40VIN Isolated 關Module DC/DC Converter

文件：896.03 Kbytes Page：20 Pages

Micropower No-Opto Isolated Flyback Converter

文件：556.42 Kbytes Page：6 Pages

2.8VIN to 40VIN Isolated 關Module DC/DC Converter with LDO Post Regulator

文件：889.52 Kbytes Page：20 Pages

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

文件：420.38 Kbytes Page：26 Pages

具有 65V/3.6A 开关的 42VIN 微功率 No-Opto 隔离型反激式转换器

LT8302/LT8302-3是一款单芯片微功耗隔离反激式转换器。该器件从原边反激式波形直接对隔离输出电压采样，无需第三绕组或光隔离器进行调节。输出电压通过两个外部电阻和第三个可选温度补偿电阻进行编程。边界工作模式提供一种具有出色负载调整率的小型解决方案。低纹波突发工作模式可在小负载时保持高效率，同时使输出电压纹波最小。散热增强型8引脚SO封装中集成了3.6A、65V DMOS功率开关以及所有高压电路和控制逻辑。\n\n LT8302/LT8302-3在3V至42V的输入电压范围内工作，最多可提供18W的隔离输出功率。高集成度、使用边界和低纹波突发模式可实现易于使用的低元件数和高效率 • 3V 至 42V 输入电压范围\n• 3.6A, 65V 内部 DMOS 电源开关\n• 低静态电流：\n• 休眠模式下为 106µA\n• 有源模式下为 380µA\n\n• 支持重负载准谐振边界模式\n• 低纹波轻载 Burst Mode® 运行\n• 最小负载为全输出的 <0.5%（典型值）\n• 无需变压器第三绕组或光隔离器即可进行输出电压调节\n• 精确的 EN/UVLO 阈值和滞后\n• 内部补偿和软启动\n• 可对输出二极管进行温度补偿\n• 输出短路保护\n• 耐热性能增强型 8 引脚 SO 封装\n• 符合面向汽车应用的 AEC-Q100 标准;

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：83023；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

丝印代码：8302；42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

文件：420.38 Kbytes Page：26 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：升压/降压 包装：管件 描述：IC REG FLYBACK 3.6A 8SOIC 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：升压/降压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG FLYBACK 3.6A 8SOIC 集成电路（IC） DC DC 开关稳压器

LF.2.7 GHz RF/IF Gain and Phase Detector

PRODUCT DESCRIPTION The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a

LF.2.7 GHz RF/IF Gain and Phase Detector

PRODUCT DESCRIPTION The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a

LF.2.7 GHz RF/IF Gain and Phase Detector

PRODUCT DESCRIPTION The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a

PLL for CCD Cameras

文件：183.38 Kbytes Page：10 Pages

MOTOR DRIVER FOR CAMERA

文件：133.33 Kbytes Page：4 Pages