Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

General description The LPC2141/42/44/46/48 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine microcontroller with embedded high-speed flash memory ranging from 32 kB to 512 kB. A 128-bit wide memory interface and a uniq

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

ARM7-based microcontrollers with full-speed USB 2.0

NXP Microcontrollers Selection Guide

Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

General description The LPC2141/42/44/46/48 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine microcontroller with embedded high-speed flash memory ranging from 32 kB to 512 kB. A 128-bit wide memory interface and a uniq

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC

单芯片16位/32位微控制器；高达512 kB的闪存，带ISP/IAP、USB 2.0全速设备、10位ADC和DAC

Customer Specification

Construction 1) Conductor a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551 b) Stranding Solid c) Diameter 0.0063 2) Braid Data a) Nominal ID 1/2 b) AWG of Ends 34 c) Number of Carriers 48 d) Nominal Percent Coverage 94 e) Total Number of Ends 336 f) Approx. Equiv. AWG 9 g) App

Low-Noise, Fast Transient 600mA Step-Down Converter

Features • VIN Range: 2.7V to 5.5V • Low Noise Light Load Mode • Low Ripple PWM Mode • VOUT Fixed or Adjustable from 0.6V to VIN • 37μA No Load Quiescent Current • Up to 98 Efficiency • 600mA Max Output Current • 2MHz Switching Frequency • 150μs Soft Start • Fast Load Transient • Over-T

Metric Snap Bushings

文件：155 Kbytes Page：1 Pages

Low Noise, Fast Transient 600mA Step-Down Converter

文件：1.35787 Mbytes Page：19 Pages

Low Noise, Fast Transient 600mA Step-Down Converter

文件：1.2429 Mbytes Page：19 Pages