Input/Output Full Swing Low Power Operational Amplifiers

General Description LMR981G/LMR982FVM/LMR931G/LMR932xxx/LMR934 xxx are input/output full swing operational amplifiers. LMR981G/LMR982FVM have the shutdown function. They have the features of low operating supply voltage, low supply current and low input bias current. These are suitable for p

Input/Output Full Swing Low Power Operational Amplifiers

文件：1.60582 Mbytes Page：63 Pages

Input/Output Full Swing Low Power Operational Amplifiers

文件：309.48 Kbytes Page：7 Pages

Screw connection, 2 solder pins per pole

The PCB connector 982-D in 9.52 mm pitch is available in 2- to 26-pole design and can be mounted side-by-side in the nominal pitch. This version is equipped with two solder pins per pole. The conductor terminal is of head contact design, whereby the screws and square washers are movably connec

Tab/screw connector blocks with tabs 4,8 or screw connection

Tab/screw connector block 982-F in 9,52 mm pitch is based on our proven 98.. series (see Catalogue 4 “Pitch 7,5 mm”). It features a 4.8 mm tab connector in star-shaped arrangement and is available in 2- to 24-pole design for a maximum of six tab connectors or alternatively one screw connector

Screw connection, 1 solder pin per pole

The PCB connector 982-S in 9.52 mm pitch is available in 2- to 26-pole design and can be mounted side-by-side in the nominal pitch. This version is equipped with one solder pin per pole. The conductor terminal is of head contact design, whereby the screws and square washers are movably connect

Silicon Planar Diodes

Features Low differential forward resistance Low diode capacitance High reverse impedance Quadro Melf package Applications Band switching in VHF–tuners

PCB connector Screw connection, wire entrance vertical to PCB

文件：57.14 Kbytes Page：1 Pages