Filterless High Efficiency 1.1W Switching Audio Amplifier

General Description\nThe LM4664 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design ■ No output filter required for inductive transducers\n■ Selectable gain of 6dB or 12dB\n■ Very fast turn on time: 7ms (typ)\n■ Minimum external components\n■ \"Click and pop\" suppression circuitry\n■ Micro-power shutdown mode\n■ Short circuit protection\n■ Available in space-saving micro SMD packa;

Filterless High Efficiency 1.1W Switching Audio Amplifier

文件：550.32 Kbytes Page：14 Pages

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

10BASE-FL to 10BASE-T Converter

GENERAL DESCRIPTION The fully pin-compatible ML4664/ML4669 pair provide conversion from 10BASE-T copper media to 10BASE-FL fiber media in a single chip. They are compliant with Ethernet IEEE 802.3 10BASE-T and 10BASE-FL standards. The ML4664/69 uses a single 5V supply, and requires no crystal or