Low Dropout Regulator with Delayed Reset

DESCRIPTION The LM2925 features a low dropout, high current regulator. Also included on-chip is a reset function with an externally set delay time. Upon power up, or after the detection of anyerror in the regulated output, the reset pin remains in the ac-tive low state for the duration of the d

Low Dropout Regulator with Delayed Reset

General Description\nThe LM2925 features a low dropout, high current regulator. Also included on-chip is a reset function with an externally set delay time. Upon power up, or after the detection of any error in the regulated output, the reset pin remains in the active low state for the duration of t 5V, 750 mA output\nExternally set delay for reset\nInput-output differential less than 0.6V at 0.5A\nReverse battery protection\n60V load dump protection\n−50V reverse transient protection\nShort circuit protection\nInternal thermal overload protection\nAvailable in plastic TO-220\nLong delay times ;

Low Dropout Regulator with Delayed Reset

文件：223.22 Kbytes Page：8 Pages

Low Dropout Regulator with Delayed Reset

DESCRIPTION The LM2925 features a low dropout, high current regulator. Also included on-chip is a reset function with an externally set delay time. Upon power up, or after the detection of anyerror in the regulated output, the reset pin remains in the ac-tive low state for the duration of the d

Low Dropout Regulator with Delayed Reset

文件：223.22 Kbytes Page：8 Pages

THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR

THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION The µPC2918, 2925 and 2926 are three-terminal low dropout voltage regulators with the 1-A output. The µPC2918 outputs 1.8 V, the µPC2925 outputs 2.5 V and the µPC2926 outputs 2.6 V. Since these regulators use a PNP transistor for the

THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR

THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION The µPC2918, 2925 and 2926 are three-terminal low dropout voltage regulators with the 1-A output. The µPC2918 outputs 1.8 V, the µPC2925 outputs 2.5 V and the µPC2926 outputs 2.6 V. Since these regulators use a PNP transistor for the

N-channel TrenchMOS??ultra low level FET

文件：93.24 Kbytes Page：12 Pages