1 Form A Solid State Relay

Description Vishay Solid State Relays (SSRs) are miniature, optically- coupled relays with high-voltage MOSFET outputs. The LH1518 relays are capable of switching AC or DC loads from as little as nanovolts to hundreds of volts. Features • Isolation Test Voltage 5300 VRMS • Current-li

1 Form A Solid-State Relay (Normally Open)

DESCRIPTION The LH1518 is an SPST normally open switch (1 Form A) that can replace electromechanical relays in many applications. The relay is constructed using a GaAlAs LED for actuation control and high reliable MOSFETs for the output switch. In addition, it employs current-limiting circui

1 Form A Solid-State Relay (Normally Open)

DESCRIPTION The LH1518 is an SPST normally open switch (1 Form A) that can replace electromechanical relays in many applications. The relay is constructed using a GaAlAs LED for actuation control and high reliable MOSFETs for the output switch. In addition, it employs current-limiting circui

封装/外壳：6-DIP（0.300"，7.62mm） 包装：管件 描述：SSR RELAY SPST-NO 300MA 0-250V 继电器 固态继电器

封装/外壳：6-DIP（0.300"，7.62mm） 包装：散装 描述：SSR RELAY SPST-NO 300MA 0-250V 继电器 固态继电器

1 Form A Solid State Relay

文件：162.06 Kbytes Page：8 Pages

1 Form A Solid State Relay

文件：163.62 Kbytes Page：8 Pages

1 Form A Solid-State Relay (Normally Open)

文件：197.1 Kbytes Page：10 Pages

5-TAP SMD DELAY LINE TD/TR = 3

FUNCTIONAL DESCRIPTION The 1518-series device is a fixed, single-input, five output, passive delay line. The signal input (IN) is reproduced at the outputs (T1-T5) in equal increments. The delay from IN to T5 (TD) and the characteristic impedance of the line (Z) are determined by the dash numbe

Audio Snake Cable, #24-32pr, TC, Indiv. Shielded, CM

Product Description Audio Snake Cable, CM-Rated, 32-24 AWG tinned copper pairs, polyolefin insulation, individually shielded with Beldfoil® bonded to numbered/color-coded PVC jackets so both strip simulteaneously, overall Beldfoil® shield, drain, flexible PVC jacket

300KHz, 3A PWM Buck DC/DC Converter

General Description The AP1518 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be cont

Dual USB High-Side Power Switch

文件：186.71 Kbytes Page：11 Pages

The L5973D is a step-down monolithic power switching regulator capable

文件：837.81 Kbytes Page：30 Pages