Power Operational Amplifier

Overview The LA6500 is a power operational amplifier. Features • High output current (IO max = 1.0A) • High gain • With current limiter • Capable of being operated from single supply

Power Operational Amplifier

Overview The LA6500 is a power operational amplifier. Features • High output current (IO max = 1.0A) • High gain • With current limiter • Capable of being operated from single supply

Power Operational Amplifier

Features • High output current (IO max=1.0A). • High gain. • With current limiter. • Capable of being operated from single supply.

Monolithic Linear IC 5ch driver for CD and DVD Spindle driver : 3-phase linear sensor-less drive BTL 4ch

Overview This LA6502 is a 5ch driver for CD and DVD Spindle driver : 3-phase linear sensor-less drive BTL 4ch. Features • Spindle driver block 1) 3-phase sensor-less motor driver 2) Soft switching drive 3) Analog input V type control 4) Current limiter incorporated 5) C

CD-ROM Drive Spindle Motor Driver Sled Motor Driver Sled Motion/Position Detector IC

Overview The LA6503 was developed for CAV control CD-ROM drives, and provides spindle motor driver, sled motor driver, and sled motion/position detection circuits. Functions and Features • CAV control spindle motor driver — Three-phase brushless motor driver — IOmax = 1 A — Built

Monolithic Linear IC DVD System motor Drives

Overview The LA6504H is a DVD system motor drives. Functions • PWM H bridge driver (3CH) + power operation amplifier (2CH)

For CD-ROM, DVD-ROM and MD players

Overview The LA6505 is a six-channel driver for CD and MD players and recorders. It adopts direct PWM drive output in the spindle motor drive to minimize heat generation at high spindle speeds. It also features a soft switching function that minimizes spindle motor drive noise by making the curr

1A Power Operational Amplifier

Overview The LA6510 is a dual power operational amplifier IC capable of delivering larger output currents than conventional operational amplifiers. The LA6510 features an on-chip current limiter and provides high voltage gain and a high common-mode rejection ratio. The LA6510 is an ideal choice

Power Operational Amplifier

Overview The LA6511 is a BLT-dedicated 1-channel driver developed for use in consumer and industrial equipment. (Do not use with ± power supply) Features and Functions • High output current (IO max = 2.0 A) • High gain • Wide operating voltage range (4 to 24 V) • Includes mute circuit (activ

High-Voltage Dual Power Operational Amplifiers?

Overview LA6512 (SIP10F) and LA6513 (SIP10) are power operational amplifier ICs capable of withstanding high voltages of ±30 V/1 A and are best suited for such voltage division devices as LCD drivers and general-purpose power operational amplifiers. Features • High output current (IO max=1.0A).

High-Voltage Dual Power Operational Amplifiers?

Overview LA6512 (SIP10F) and LA6513 (SIP10) are power operational amplifier ICs capable of withstanding high voltages of ±30 V/1 A and are best suited for such voltage division devices as LCD drivers and general-purpose power operational amplifiers. Features • High output current (IO max=1.0A).

0.5A Power Operational Amplifier

Two-Output Power Amplifier

Overview The LA6516 is a two-output power amplifier developed for use in both consumer and industrial equipment. Functions • High slew rate (1.0 V/µs) • High output current (IO max = 1.0 A) • Current limiter function • Wide operating voltage range (±2 to 18 V) • Supports single-voltage powe

2-Output Power Operational Amplifier

2-Output Power Operational Amplifier

2-Channel Power Operational Amplifier

Features and Functions • High output current (IO max = 0.5 A) • High gain • Includes current limiter • Wide operating voltage range (±2 to ±18 V) • Single power supply operation possible (4 to 36 V) • Thermal shutdown function built in Applications The LA6518M is a 2-output power opera

2-Output Power Operational Amplifier

2-Channel Power Operational Amplifier

Features and Functions • High output current (IO max = 0.5 A) • High gain • Includes current limiter • Wide operating voltage range (±2 to ±18 V) • Single power supply operation possible (4 to 36 V) • Thermal shutdown function built in Applications The LA6518M is a 2-output power opera

3-Output Power Operational Amplifier

Overview The LA6520 is a 3-output power OP amp designed for use in consumer, industrial applications. Features • High output current (Io = 0.5 A) • High gain • With current limiter • Wide operating voltage range (±2 to ±18 V) • Capable of being operated from single supply (4 to 36V) • On-c

3-Output Power Operational Amplifier

Overview The LA6523 is a 3-output power operational amplifier IC developed for widespread use in consumer and industrial applications. Features and Functions • High output current (Io max = 0.5 A) • High gain • Current limiter • Wide operating supply voltage (±2 to ±18 V) • Single supply op

4-output Power Driver

Overview The LA6524 is a 4-output power driver developed for use in consumer and industrial equipment. Functions • Four buffer amp circuits on chip • High output current (Io max = 0.5 A) • Includes current limiter • Broad operating voltage range (±2 to +12 V) • Single power supply operation

Four-channel Bridge Driver for Compact Dise Players

Overview The LA6525M is a four-channel, high-current bridge driver IC with output muting. It features two dual-output 400mA (max) and two dual-output 700mA (max) channels, making it ideal for use in compact disc players. The LA6525M incorporates a reference voltage switch, a thermal protection c

CD-ROM Drive Three-Channel Bridge BTL Driver

Overview The LA6529M is a three-channel bridge (BTL) driver for CD-ROM drives. Functions and Features • Three bridge-tied load (BTL) power amplifier channels • IO max: 1 A • Muting circuit • Thermal shutdown circuit

2-Channel BTL-Use Drivers

Overview The LA6530, 6531 are 2-channel BTL-use drivers designed for compact disc pickup actuation. Functions and Features • High output current (IO max=0.7A). • Wide operating voltage range (4 to 15V), • Low input bias current. • LA6530 ..... Output of amps 1 to 4 at muting-ON

2-channel Bridge Driver for CD and CD-ROMs

Overview The LA6530M is a 2-channel bridge (BTL) driver which was developed for compact discs and CD-ROMs. Features . High output current (IO max = 0.7 A). . Wide operating voltage range (4 to 15 V). . Small input bias current.

2-Channel BTL-Use Drivers

Overview The LA6530, 6531 are 2-channel BTL-use drivers designed for compact disc pickup actuation. Functions and Features • High output current (IO max=0.7A). • Wide operating voltage range (4 to 15V), • Low input bias current. • LA6530 ..... Output of amps 1 to 4 at muting-ON

4-Channel BTL-Use Driver

4-Channel BTL-Use Driver

2-Channel BTL-Use or 4-Channel Driver???

Overview The LA6533 is a 2-channel BTL-use driver designed for compact disc pickup actuation or a 4-channel driver for general-purpose applications. Functions and Features • High output current (IO max=0.5A). • Wide operating voltage range (4 to 15V). • Low input bias current. • On-chip ther

2-Channel BTL-Use Driver?

Overview The LA6534 is a 2-channel BTL-use driver designed for compact disc pickup actuation. Functions and Features • High output current (IO max=0.5A). • Wide operating voltage range (4 to 15V). • Low input bias current. • High slew rate (0.8V/µs typ). • Output of amplifiers 1 to 4 and bu

Four-channel Bridge Driver for Compact Dise Players?

Overview The LA6535M is a four-channel bridge driver IC with output muting. It features 700 mA per channel (max) output current, making it ideal for use in compact disc players. The LA6535M operates from a 5V supply and is available in 30-pin MFPs. Features • Four-channel bridge connection (BT

Four-channel Bridge Driver for Compact Dise Players?

Overview The LA6536M is a four-channel bridge driver IC with output muting. It features 700 mA per channel (max) output current, making it ideal for use in radio cassette recorders incorporating a compact disc player. The LA6536M operates from a 5V supply and is available in 30-pin MFPs. Feature

4-channel Bridge Driver for CD and CD-ROMs

Overview The LA6537 is a 4-channel bridge (BTL) driver which was developed for compact discs and CD-ROMs. Features and Functions • 4-channel bridge (BTL) power amplifier. • IO max 700 mA. • With mute circuit (Amp 3, Amp 4).

4-channel Bridge Driver for CD and CD-ROMs

Overview The LA6537M is a 4-channel bridge (BTL) driver which was developed for compact discs and CD-ROMs. Features and Functions • 4-channel bridge (BTL) power amplifier. • IO max 700 mA. • With mute circuit (Amp 3, Amp 4).

Single-Phase Full-Wave Fan Motor Driver

Overview The LA6538T is optimal for use as a fan motor driver in equipment, such as notebook personal computers and electronic game units, that requires miniaturization and low noise levels. This device achieves highly efficient single-phase bipolar fan motor drive by providing a low saturation v

Three-Channel CD-ROM Bridge Driver BTL

Overview The LA6539M is a three-channel bridge driver (BTL) developed for use in CD-ROM drives. Functions • Three-channel balanced transformerless (BTL) power amplifier • IO max: 1 A • Muting circuit • Thermal shutdown function • Slew rate (SR): 0.5 V/µs (typical)

4-output Power Operational Amplifier

Overview The LA6540M is a 4-output power operational amplifier developed for use in consumer and industrial equipment. Functions • High output current (IO max = 0.7 A : typ) • Includes a current limiter • Wide operating voltage range (±2 to ±16 V) • Single-supply operation possible (4 to 32

4-output Power Operational Amplifier

Overview The LA6540M is a 4-output power operational amplifier developed for use in consumer and industrial equipment. Functions • High output current (IO max = 0.7 A : typ) • Includes a current limiter • Wide operating voltage range (±2 to ±16 V) • Single-supply operation possible (4 to 32

4-channel Bridge Driver for Compact Discs

Overview The LA6541 is a 4-channel bridge (BTL) driver with a 5 V power supply (uses an external PNP transistor) developed for compact discs. Functions and Features • 4-channel bridge (BTL) power amplifier. • IO max. = 700 mA. • With mute circuit (Affects all amplifier outputs, Amp 1 to A

4-channel Bridge Driver for Compact Discs

Functions and Features • 4-channel bridge (BTL) power amplifier. • IO max. 700 mA. • With mute circuit (Affects all amplifier outputs, Amp 1 to Amp 8). (When the mute voltage is low, the outputs turn off; when the mute voltage is high, the outputs turn on). • 5.0 V regulator built

Monolithic Linear IC For CD Players and Recorders Four-Channel Driver IC

Overview The LA6541ND is a four-channel driver IC for CD players and recorders (four BTL amplifier channels). Features • Four BTL connection power amplifier channels • IO max 0.7A • Built-in level shifters • Muting circuit (on/off control of all outputs) (This circuit applies to the BTL

For CD Players and Recorders Four-Channel Driver IC

Overview The LA6541NH is a four-channel driver IC for CD players and recorders (four BTL amplifier channels). Functions • Four BTL connection power amplifier channels • IO max 0.7A • Built-in level shifters • Muting circuit (on/off control of all outputs) (This circuit applies to the BTL

4-Channel Bridge (BTL) Driver for CD-ROM

Overview The LA6542M is a 4-channel bridge (BTL) driver developed for CD-ROM applications. Functions • 4-channel power amplifier with bridge circuit (BTL) • IOmax: 1A • Integrated muting circuit (MUTE: Output OFF at Low, output ON at High. MUTE1 is for channels 1 and 2, and MUTE2 for channels

4-Channel Bridge (BTL) Driver for CD-ROM

Overview The LA6543M is a 4-channel bridge (BTL) driver developed for CD-ROM applications. Functions • 4-channel power amplifier with bridge circuit (BTL) • IO max: 1A • Integrated muting circuit (MUTE: Output OFF at Low, output ON at High. MUTE1 is for channel 1, and MUTE2 for channels 2, 3

4-Channel Bridge (BTL) Driver for CD-ROM

Overview The LA6543M is a 4-channel bridge (BTL) driver developed for CD-ROM applications. Functions • 4-channel power amplifier with bridge circuit (BTL) • IO max: 1A • Integrated muting circuit (MUTE: Output OFF at Low, output ON at High. MUTE1 is for channel 1, and MUTE2 for channels 2, 3

LA6544H

LA6544H is a 4CH bridge (BTL) driver developed for CD-ROM. Function ▪ Bridge connection (BTL) POWER AMP 4CH. ▪ VCE (remaining voltage) is small by using 2 power supplies (CH1 ~ 3). ▪ IO MAX 1A. ▪ With MUTE circuit (output ON / OFF). (Output is OFF when MUTE is LOW, and output is ON when

Four-Channel Bridge (BTL) Driver for CD-ROM

Overview The LA6544M is a 4-channel bridge (BTL) driver developed for use in CD-ROM systems. Functions • Bridge connected (BTL) four-channel power amplifier • VCE (residual voltage) minimized (channels 1 to 3) by using two power supplies. • IOmax: 1.0 A • Muting circuit provided (output on/o

Four-Channel Bridge (BTL) Driver for CD-ROM

Overview The LA6545M is a 4-channel bridge (BTL) driver developed for use in CD-ROM systems. Functions • Bridge connected (BTL) four-channel power amplifier • VCE (residual voltage) minimized (channels 1 and 2) by using two power supplies. • IOmax: 1.0 A • Muting circuit provided (output on/

Four-Channel Bridge (BTL) Driver

Overview The LA6546H is a 4-channel bridge (BTL) driver for CD players. Functions • Bridge-connection (BTL) power amplifier 4-channel. • IO max 700mA • Operation-amplifier built-in • MUTE circuit built-in (operable for all channels) • 5V power supply built-in (with external PNP output) • R

LA6551

Actuator Driver IC Series Developed Low saturation voltage output ICs support a wide range of applications from audio CD players to DVD RAM drives. Overview The digital optical disc media market, which started with the compact disc (CD), has developed phenomenally, and can be said to

LA6556

Actuator Driver IC Series Developed Low saturation voltage output ICs support a wide range of applications from audio CD players to DVD RAM drives. Overview The digital optical disc media market, which started with the compact disc (CD), has developed phenomenally, and can be said to

Five-Channel Bridge Driver for MD and CD Players

Overview The LA6557H is a five-channel bridge driver developed for use in CD and MD players. It provides four BTL power amplifier channels and one H-bridge power amplifier channel. Features and Functions • Four BTL power amplifier channels and one H-bridge power amplifier channel • IOmax: 700

Five-Channel Bridge Driver for MD and CD Players

Overview The LA6557H is a five-channel bridge driver developed for use in CD and MD players. It provides four BTL power amplifier channels and one H-bridge power amplifier channel. Features and Functions • Four BTL power amplifier channels and one H-bridge power amplifier channel • IOmax: 700

6-CH Driver for Mini Disk

Overview The LA6558 is a 6-channel driver developed for MD and CD players. Features • Power amplifier 6-channel built-in • IO max 700mA • Level shift circuit built-in (BTL AMP) • One mute circuit (output ON/OFF) built-in • 3.3V power supply built-in (IO max=300mA) • 5V po

5-Channel Driver

Overview The LA6559 is a 5-channel driver (BTL : 4-channel, H bridge : 1-channel) for CD players. Functions • Power amplifier 5-channel built-in. (Bridge-connection (BTL) : 4-channel, H bridge : 1-channel) • IO max 1A • Level shift circuit built-in (except H bridge). • Mute circuit (output O

Five-Channel Driver

Overview The LA6560 is a 5-channel driver (BTL : 4-channel, H bridge : 1-channel) for CD players. Functions •Power amplifier 5-channel built-in. (Bridge-connection (BTL) : 4-channel, H bridge : 1-channel) •IOmax 1A •Level shift circuit built-in (except H bridge). •Mute circui

4CH Bridge (BTL) Driver for CD

Overview The LA6563 is a 4CH bridge (BTL) driver for CD players. Features • Built-in bridge connection (BTL) POWER AMP 4CH • IO max 1A • MUTE circuit (main power is ON/OFF) with 3 systems • Built-in STBY circuit (all circuits are OFF) • Provides bias voltage (VREF) switching function (Selec

4CH Bridge (BTL) Driver for CD-R

4CH Bridge (BTL) Driver for CD-R

Five-Channel CD Actuator Driver

Overview The LA6565 is a 4-channel BTL plus 1-channel H-bridge actuator driver developed for use in CD and DVD drives. The BTL driver channels 1 and 2 include built-in operational amplifiers allowing the LA6565 to support a wide range of applications. Functions •Five power amplifier

Monolithic Linear IC Five-Channel CD Actuator Driver (BTL: 4 channels, H bridge: 1 channel)

Overview The LA6565VR is a four-channel BTL plus one-channel H bridge actuator driver developed for use in CD and DVD drives. The BTL driver channels 1 and 2 include built-in operational amplifiers allowing the LA6565VR to support a wide range of applications. Functions and Features •Fi