Soft, round, 6mm dia, Hard, flat, 12mm wide, Hard, flat, 25mm wide

[VERMASON] Description: The brushes consist of a conductive plastic handle and Thunderon conductive fibres, mixed with animal hair if stiffness is desired. Resistance from the tip of the brush to the handle is less than 5 x 106 ohm. Brushes should be used by operators who are earthed

3 Watts - 28 Volts, Class C Microwave 3000 MHz

GENERAL DESCRIPTION The 3003 is a COMMON BASE transistor capable of providing 3 Watts Class C, RF output power at 3000 MHz. Gold metalization and diffused ballasting are used to provide high reliability and supreme ruggedness. The transistor uses a fully hermetic High Temperature Solder Sealed pa

KK Maxi-3.96mm & 5.08mm Modular Interconnection System

KEY FEATURES ■ Available on 3.96 mm and 5.08 mm center spacings ■ Polarisation via insertable keys and pegs ■ Allows connections anywhere on the board ■ Double cantilever style terminal ■ Selective gold plating options ■ End-to-end stacking capabilities ■ Locking ramp for improved mated ret

10 MHz Sine/Square Wave Generator

[B&K Precision Corp.] 10 MHz Sine/Square Wave Generator The model 3003 signal generator is a cost-effective signal source that delivers clean and accurate DC to 10 MHz waveforms with frequency accuracy of 0.02 and 0.1Hz frequency resolution. Eight push wheel switches enable the user to quick

RF Manual 16th edition

10 MHz Sine/Square Wave Generator

文件：493.97 Kbytes Page：1 Pages