位置：首页 > IC中文资料第1155页 > K121
K121价格
参考价格：￥0.1956
型号：K121J15C0GF5TL2 品牌：Vishay 备注：这里有K121多少钱，2025年最近7天走势，今日出价，今日竞价，K121批发/采购报价，K121行情走势销售排行榜，K121报价。| 型号 | 功能描述 | 生产厂家 企业 | LOGO | 操作 |
|---|---|---|---|---|
K121 | HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG |   | |
K121 | 1.2 x 1.0 x 0.5mm Tuning Fork ??2 pad 文件：388.15 Kbytes Page：3 Pages | FOX | | |
9...25 A Switching Regulators Input voltage up to 144 VDC Single output of 3.3 to 48 VDC No input-to-output isolation • RoHS lead solder exemption compliant • Efficiency up to 97 • Low input-output differential voltage • No derating over temperature | POWER-ONE | | ||
9...25 A Switching Regulators Input voltage up to 144 VDC Single output of 3.3 to 48 VDC No input-to-output isolation • RoHS lead solder exemption compliant • Efficiency up to 97 • Low input-output differential voltage • No derating over temperature | POWER-ONE | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | | ||
HIGH POWER LATCHING RELAY Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach th | KG | |
K121产品属性
- 类型
描述
- 型号
K121
- 功能描述
CAP CER 120PF 50V 5% RADIAL
- RoHS
是
- 类别
电容器 >> 陶瓷
- 系列
Mono-Kap™
- 标准包装
4,000
- 系列
-
- 电容
1000pF 电压 -
- 额定
50V
- 容差
±10%
- 温度系数
X7R
- 安装类型
表面贴装，MLCC
- 工作温度
-55°C ~ 125°C
- 应用
自动
- 额定值
AEC-Q200
- 封装/外壳
0805（2012 公制）
- 尺寸/尺寸
0.079 L x 0.047 W（2.00mm x 1.20mm） 高度 -
- 座高（最大）
-
- 厚度（最大）
-
- 引线间隔
-
- 特点
-
- 包装
带卷(TR)
- 引线型
-
| IC供应商 | 芯片型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
|---|---|---|---|---|---|---|---|
VISHAY/威世 |
23+ |
DIP |
13000 |
原厂授权一级代理,专业海外优势订货,价格优势、品种 |
|||
VISHAY(威世) |
24+ |
插件,P=5mm |
7350 |
现货供应,当天可交货!免费送样,原厂技术支持!!! |
|||
VISHAY/威世 |
24+ |
NA/ |
19250 |
原装现货,当天可交货,原型号开票 |
|||
N/A |
NA |
8560 |
一级代理 原装正品假一罚十价格优势长期供货 |
||||
FUJI |
23+ |
TO-3PF |
8000 |
只做原装现货 |
|||
VISHAY/威世 |
23+ |
DIP |
50000 |
全新原装正品现货,支持订货 |
|||
MAT |
24+ |
TO-220F |
5000 |
全现原装公司现货 |
|||
东芝TOSHIBA |
23+24 |
TO-3P |
9860 |
原厂原包装。终端BOM表可配单。可开13%增值税 |
|||
FUJITSU/富士通 |
21+ |
TO-3P |
10000 |
原装现货假一罚十 |
|||
VISHAY/威世 |
2022+ |
DIP |
93000 |
原厂代理 终端免费提供样品 |
K121芯片相关品牌
K121规格书下载地址
K121参数引脚图相关
- l298n
- l298
- l297
- l295
- l293d
- l234
- l101
- l100
- ku波段
- kt250
- kse13005
- ks20
- km710
- ka5q1265rf
- k9f1208
- k310
- k2698
- k233
- k2055
- k2010
- K1307
- K1305SC
- K1305S
- K1305C
- K1305
- K1300Y
- K1300SC
- K1300SB
- K1300SA
- K1300S
- K1300G
- K1300C
- K1300
- K12PBK1.55N
- K12J60U
- K12GONT1.53.5-7N
- K12GONT1.5-3.5-7N
- K12GOBK1.56/12N
- K12GBK1.53.5-7N
- K12GBK1.53.5/7N
- K12CBK12.5N
- K12C15N
- K12C12.5N
- K-12-C
- K12ABK15N
- K12ABK12.5N1R
- K12ABK12.5N
- K12ABK1.55N
- K12A60W
- K12A60D
- K12A50D
- K12A25N
- K12A15N
- K1284
- K-126
- K1250B1/4
- K122K15X7RF53L2
- K122J15C0GF5TL2
- K121K10X7RF5UH5
- K121J15C0GF5TL2
- K120J15C0GH53L2
- K120J15C0GF5TL2
- K12060D
- K12060
- K12050D
- K12040D
- K12040
- K12030D
- K12030
- K12025D
- K12025
- K12020D
- K12020
- K1200Y
- K1200SB
- K1200SA
- K1200S1URP
- K1-200-S-1-C-1-N-1
- K1200S
- K1200GURP
- K1200G
- K1200E70
- K1200
- K12/240-PROPLUS
- K11A60D
- K1150BA
- K1149CA
- K1144BT-15.360MHZ
- K-1102
- K1100SRP
- K1100S1URP
- K1100GURP
- K1100G
- K1100E70
- K10P-4074-24
- K10P-11DT5-36
- K10P-11DT5-24
- K10P-11DT5-12
- K10P-11D55-48
K121数据表相关新闻
K1109G-SOT723R-J35-TG_UTC代理商
K1109G-SOT723R-J35-TG_UTC代理商
2023-2-17K1109L-SOT23.3R-J34-TG_UTC代理商
K1109L-SOT23.3R-J34-TG_UTC代理商
2023-2-10K1109L-SOT23.3R-J36-TG
K1109L-SOT23.3R-J36-TG
2023-2-1K24C02
K24C02,当天发货0755-82732291全新原装现货或门市自取.
2020-10-4K150E09NE
K150E09NE ,全新原装当天发货或门市自取0755-82732291.
2020-7-2K12C15N按键开关原厂正规代理宇集芯电子
K12C15N C&K 的 K12 高性能按键开关有多种 LED 颜色、行程和起动力选择， 非常适合摩托车、越野车、操纵杆、网络设备或工业电子设备。K12 是专为低电平切换而设计的， 而且持久耐用。它可以密封抵御外来环境， 也有双冲程或检测器版本可用。
2019-11-18
DdatasheetPDF页码索引
- P1
- P2
- P3
- P4
- P5
- P6
- P7
- P8
- P9
- P10
- P11
- P12
- P13
- P14
- P15
- P16
- P17
- P18
- P19
- P20
- P21
- P22
- P23
- P24
- P25
- P26
- P27
- P28
- P29
- P30
- P31
- P32
- P33
- P34
- P35
- P36
- P37
- P38
- P39
- P40
- P41
- P42
- P43
- P44
- P45
- P46
- P47
- P48
- P49
- P50
- P51
- P52
- P53
- P54
- P55
- P56
- P57
- P58
- P59
- P60
- P61
- P62
- P63
- P64
- P65
- P66
- P67
- P68
- P69
- P70
- P71
- P72
- P73
- P74
- P75
- P76
- P77
- P78
- P79
- P80
- P81
- P82
- P83
- P84
- P85
- P86
- P87
- P88
- P89
- P90
- P91
- P92
- P93
- P94
- P95
- P96
- P97
- P98
- P99
- P100
- P101
- P102
- P103
- P104
- P105
- P106
- P107
