Power Module for 5 hp Motor Drives

Power Module The IRPT3054A Power Module shown in figure 1 is a chip and wire epoxy encapsulated module. It houses input rectifiers, output inverter, current sense shunts and NTC thermistor. The 3-phase input bridge rectifiers are rated at 1600V. The brake circuit uses 1200V IGBT and freewheeling

Power Module for 5 hp Motor Drives

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

The A3054KU and A3054SU Hall-effect sensors are digital magnetic sensing ICs capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monito

WASHERS AND NUTS

[KEYSTONE] FIBRE SHOULDER WASHERS HEX MACHINE NUTS NYLON SHOULDER WASHER/BUSHINGS BLIND CAPTIVE NUTS - PRESS FIT METRIC MACHINE NUTS

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

The A3054KU and A3054SU Hall-effect sensors are digital magnetic sensing ICs capable of communicating over a two-wire power/signal bus. Using a sequential addressing scheme, the device responds to a signal on the bus and returns the diagnostic status of the IC, as well as the status of each monito

Notch filter 252 KHz Notch Frequency 50 ??SMA Connectors

文件：34.03 Kbytes Page：2 Pages

Manual Step, Ruggedized SMA Connectors

文件：610.6 Kbytes Page：2 Pages