SMPS MOSFET

Applications • Switch Mode Power Supply (SMPS) • Uninterruptable Power Supply • High speed power switching Benefits • Low Gate Charge Qg results in Simple Drive Requirement • Improved Gate, Avalanche and dynamic dv/dt Ruggedness • Fully Characterized Capacitance and Avalanch

HEXFET Power MOSFET (SMPS MOSFET)

Applications • Switch Mode Power Supply (SMPS) • Uninterruptable Power Supply • High speed power switching • Lead-Free Benefits • Low Gate Charge Qg results in Simple Drive Requirement • Improved Gate, Avalanche and dynamic dv/dt Ruggedness • Fully Characterized Capacitance and Avalanche V

PowerMOS transistor Avalanche energy rated

GENERAL DESCRIPTION N-channel, enhancement mode field-effect power transistor, intended for use in off-line switched mode power supplies, T.V. and computer monitor power supplies, d.c. to d.c. converters, motorcontrol circuits and general purpose switching applications. The IRF730 is supplied in

N - CHANNEL 400V - 0.75 ohm - 5.5A - TO-220 PowerMESH] MOSFET

Description The PowerMESH™II is the evolution of the first generation of MESH OVERLAY™. The layout refinements introduced greatly improve the Ron*area figure of merit while keeping the device at the leading edge for what concerns swithing speed, gate charge and ruggedness. General features

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec

5V STEP-DOWN, CURRENT-MODE PWM DC-DC CONVERTERS

DESCRIPTION The ST730A is a 5V output CMOS, step-down switching regulator. The ST730A accepts inputs between 5.2V and 11V and delivers 450mA. Typical efficiencies are 85 to 96. Quiescent supply current is 0.8mA and only 0.3µA in shutdown mode. The output does not exhibit frequency over this spec