Programmable Data Buffer

The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay b

Programmable Data Buffer

Features •DC to 32MHz Operating Frequency •Programmable Buffer Length from 2 to 1281 Words •Supports Data Words to 10 Bits •Clock Select Logic for Positive or Negative Edge System Clocks •Data Recirculate or Delay Modes of Operation •Expandable Data Word Width or Buffer Length •Three-State

Programmable Data Buffer

文件：372.96 Kbytes Page：8 Pages

Programmable Data Buffer

Programmable Data Buffer

The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay b

Programmable Data Buffer

The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay b

Programmable Data Buffer

The HSP9501 is a 10-Bit wide programmable data buffer designed for use in high speed digital systems. Two different modes of operation can be selected through the use of the MODSEL input. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay b

Programmable Data Buffer

Features •DC to 32MHz Operating Frequency •Programmable Buffer Length from 2 to 1281 Words •Supports Data Words to 10 Bits •Clock Select Logic for Positive or Negative Edge System Clocks •Data Recirculate or Delay Modes of Operation •Expandable Data Word Width or Buffer Length •Three-State

Programmable Data Buffer

文件：372.96 Kbytes Page：8 Pages

Programmable Data Buffer

文件：372.96 Kbytes Page：8 Pages

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

531/1063 Mbaud Fibre Channel Transmitter and Receiver

TriQuint’s Fibre Channel transmitter (TQ9501) and receiver (TQ9502) are part of the FC531/FC1063 (Fibre Channel 531 and 1063 Megabaud) chip set. In addition to the transmitter and receiver, TriQuint offers the ENcoder/DECoder (TQ9303 ENDEC). The TQ9501, TQ9502, TQ9303 and a gigabit fiber optic mod