RF Signal Relays

RF Signal Relays HF3 Relay ■ Y-Design ■ Frequency range DC to 3GHz ■ Impedance 50Ω or 75Ω ■ Small dimensions (14.6x7.2x10mm) ■ 1 form C contact (1 changeover contact) ■ Immersion cleanable ■ Low power consumption (≤140mW) Typical applications Cable modems and linecards/ CATV, Tabs, m

Signal and RF Relays

文件：1.93062 Mbytes Page：12 Pages

WASHERS AND NUTS

[KEYSTONE] FIBRE SHOULDER WASHERS HEX MACHINE NUTS NYLON SHOULDER WASHER/BUSHINGS BLIND CAPTIVE NUTS - PRESS FIT METRIC MACHINE NUTS

FIELD PROGRAMMABLE TRIPLE OUTPUT SS VERSACLOCK SYNTHESIZER

Description The ICS343 is a low cost, triple-output, field programmable clock synthesizer. The ICS343 can generate three output frequencies from 250 kHz to 200 MHz, using up to three independently configurable PLLs. The outputs may employ Spread Spectrum techniques to reduce system electro-magnet

FIELD PROGRAMMABLE TRIPLE OUTPUT SS VERSACLOCK SYNTHESIZER

Description The ICS343 is a low cost, triple-output, field programmable clock synthesizer. The ICS343 can generate three output frequencies from 250 kHz to 200 MHz, using up to three independently configurable PLLs. The outputs may employ Spread Spectrum techniques to reduce system electro-magnet

5-Amp Gate Drive Optocoupler in 15-mm SSO8 Package with 100-kV/μs Noise Immunity

Features 5.0A maximum peak output current 15-mm creepage and 14.2-mm clearance Rail-to-rail output voltage UVLO with VE reference for negative power supply 150-ns maximum propagation delay 90-ns maximum propagation delay difference LED current input with hysteresis 100 kV/μs minimum Common

200 ns maximum propagation delay

Description The ACPL-P343/W343 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the outpu