7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays

Description The 7.6 mm (0.3 inch) and 10.9 mm (0.43 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet). These devices use an industry standard size package and pinouts. All devices are available as either common anode or common cath

16-Bit 1 MSPS SAR Unipolar ADC with Ref

GENERAL DESCRIPTION The AD7667is a 16-bit, 1 MSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

GENERAL DESCRIPTION The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error

16-Bit, 750 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7612 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial