Four Character 5.0 mm (0.2 inch) Smart 5 x 7 Alphanumeric Displays

Description These are 5.0 mm (0.2 inch) four character 5 x 7 dot matrix displays driven by an on-board CMOS IC. These displays are pin for pin compatible with the HPDL-2416. The IC stores and decodes 7 bit ASCII data and displays it using a 5 x 7 font. Multiplexing circuitry, and drivers are also

Four Character 5.0 mm (0.2 inch) Smart 5x7 Alphanumeric Displays

文件：234.41 Kbytes Page：12 Pages

Four Character 5.0 mm (0.2 inch) Smart 5횞7 Alphanumeric Displays

文件：613.08 Kbytes Page：18 Pages

包装：管件 描述：LED DISPLAY 5X7 4CHAR 5MM RED 光电器件 显示器模块 - LED 点阵和群集

Four Character 5.0 mm (0.2 inch) Smart 5 x 7 Alphanumeric Displays

160 RED, 4-CHARACTER 16 SEGEMENT PLUS DECIMAL ALPHANUMERIC INTELLIGENT DISPLAY

.160 Red, 4-Character 16 Segement Plus Decimal Alphanumeric Intelligent Display With Memory/Decoder/Driver

4-Character 5x7 Dot Matrix Alphanumeric IntelligentDisplay with Memory/Decoder/Driver

DESCRIPTION The DLR/DLO/DLG2416 is a four digit 5x7 dot matrix display module with a built-in CMOS integrated circuit. This display is X/Y stackable. The integrated circuit contains memory, ASCII ROM decoder, multiplexing circuitry and drivers. Data entry is asynchronous and can be random. A

Dual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 270 k Pixels

DESCRIPTION The LZ2416J is a 1/4-type (4.5 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices) driven by dual-power-supply . With approximately 270 000 pixels (542 horizontal x 492 vertical), the sensor provides a stable high-resolution B/W normal or mi

Silicon Complementary Transistors High Current General Purpose Amp/Switch

Features: • Built–In Bias Resistors • Small SOT–23 Surface Mount Package Applications: • Switching Circuits • Inverters • Interface Circuits • Driver

DUAL-BAND 2.7V LOW NOISE AMPLIFIER

Product Description The RF2416 is a dual-band low noise amplifier with bypass switch designed for use as a front-end for 950MHz GSM and DCS1800/PCS1900 applications. It may also be used for dual-band cellular/PCS application. The 900MHz LNA is a single-stage amplifier with bypass switch; the 1800