16-bit Universal Bus Driver with 3-state Outputs

Description This HD74ALVC162334 is a 16-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation. All outputs, which are designed to sink up to 12 mA, include equivalent 26 Ω resistors to reduce overshoot and undreshoot. Features • VCC = 2.3 V to 3.6 V • Typical VOL ground bounce

16-bit Universal Bus Driver with 3-state Outputs

16-bit registered driver with inverted register enable and 30 Ω termination resistors (3-state)

1. General description The 74ALVC162334A is a 16-bit universal bus driver. Data flow is controlled by active LOW output enable (OE), active LOW latch enable (LE), and clock input (CP). When LE is LOW, the A to Y data flow is transparent. When LE is HIGH and CP is held at LOW or HIGH, the data

16-bit registered driver with inverted register enable and 30ohm termination resistors 3-State

DESCRIPTION The 74ALVC162334A is an 16-bit universal bus driver. FEATURES • Wide supply voltage range of 1.2 V to 3.6 V • Complies with JEDEC standard no. 8-1A. • CMOS low power consumption • Direct interface with TTL levels • Current drive ± 24 mA at 3.0 V • MULTIBYTETM flow-through

16-bit registered driver with inverted register enable and 30 W termination resistors (3-state)

16-bit registered driver with inverted register enable and 30 W termination resistors (3-state)

16-bit registered driver with inverted register enable and 30ohm termination resistors 3-State

DESCRIPTION The 74ALVC162334A is an 16-bit universal bus driver. FEATURES • Wide supply voltage range of 1.2 V to 3.6 V • Complies with JEDEC standard no. 8-1A. • CMOS low power consumption • Direct interface with TTL levels • Current drive ± 24 mA at 3.0 V • MULTIBYTETM flow-through