Hall-Effect Switches

Introduction The Hall switches HAL 525 and HAL 526 are produced in CMOS technology. These sensors include a temperature-compensated Hall plate with active offset compensation, a comparator, and an open-drain output transistor. The comparator compares the actual magnetic flux through the Hall pl

Hall Effect Sensor IC

[Micronas] Introduction The HAL525 and HAL535 are Hall switches produced in CMOS technology. The sensors include a temperature-compensated Hall plate with active offset compensation, a comparator, and an open-drain output transistor. The comparator compares the actual magnetic flux through the H

Configured Digitally Programmable Potentiometer (DPP??: Programmable Voltage Applications

DESCRIPTION The CAT525 is a quad 8-bit digitally programmable potentiometer (DPP™) configured for programmable voltage and DAC-like applications. Intended for final calibration of products such as camcorders, fax machines and cellular telephones on automated high volume production lines and syste

Surface Mount High Performance AlInGaP LED Indicators

Description The LED material used in these devices is the very efficient absorbing Substrate aluminum indium gallium phosphide (AS AlInGaP), capable of producing high light output over a wide range of drive currents. Features • Outstanding LED Material Efficiency • Exceptional Light Output Ove

SINGLE CELL BATTERY POWERED ELECTROLUMINESCENT LAMP DRIVER/INVERTER

The IMP525 is an Electroluminescent (EL) lamp driver designed for systems that must operate below 1 volt. The input supply voltage range is 0.9V to 2.5V. Typical output lamp drive voltage is 112V. All four EL lampdriving functions are on-chip. These are the switch-mode power supply, its high-frequ

SINGLE CELL BATTERY POWERED ELECTROLUMINESCENT LAMP DRIVER/INVERTER

The IMP525 is an Electroluminescent (EL) lamp driver designed for systems that must operate below 1 volt. The input supply voltage range is 0.9V to 2.5V. Typical output lamp drive voltage is 112V. All four EL lampdriving functions are on-chip. These are the switch-mode power supply, its high-frequ

Silicon Diode High Voltage Fast Recovery Switch

Features: ● Fast Switching ● Low Leakage ● High Current Capability ● High Surge Capability ● High Reliability